- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description
The module is compatible with Genuino / Arduino 101, is equipped with a 32-bitIntel Curie x86(Quark) 32 MHz microcontroller. It has196 KB of Flash memory, 24 KB of SRAM, 15 digital inputs/outputs, including4 channels of PWM, 6 analog inputsand communications interfaces. Leads operate at a voltage of 3.3 V, tolerate a value of 5 V. The board also has a Bluetooth LE module and6-axis accelerometer and 3-axis compass.
|
Detailed product description can be found inthe user guide. |
Wiring diagram
For programming the device, you will need the following: a computer and amicroUSB cable.
Key features
Below are a few features that distinguish modules Curie from the other programmable boards.
| Name | Description |
|---|---|
|
Installed bootloader |
Thanks to bootloader, for programming the device, the appropriate USB cableandsoftware from the manufacturer's website are only needed. |
| Built-in modules | On the board are: 6-axis accelerometer and 3-axis compass and Bluetooth Low Energy system. |
| Microcontroller | The board has a 32-bit chipIntel Curie with ARC x86(Quark)with a clock frequency of 32 MHz. It has 196 KB of Flash memory and 24 KB of SRAM. |
|
Digital leads |
15 digital inputs/outputs allows for, i.a. control of LEDs, relays and reading the button's states.Despite the fact that the leads are working with the voltage of 3.3 V, they also tolerate a value of 5 V. |
|
Efficiency of current |
The maximum current efficiency of one lead is 20 mA. |
|
PWM outputs |
4 PWM outputs allows, for example, for control of motors and brightness control of the LEDs. |
|
Analog inputs |
6 inputs of built-in analog-digital converterwith a resolution of 10-bit, support, i.a. sensors with analog output. |
|
Serial communication |
The device supports popular communiaction interfaces, i.a. UART, I2C (TWI), SPI. |
| Special functions | Some of the pins have special functions which brief description is available onthe website of the manufacturer. |
|
Built-in memory |
The Intel Curie clocked with a signal with a frequency of 32 MHz, it has 196 KB of Flash memory and 24 KB of SRAM memory. |
|
Power USB port |
The tile can be powered from a computer viaUSB cable, bearing in mind that the maximum current efficiency for the USB port is 500 mA. Arduino has a system that protects the socket from short-circuit and the flow of too high current. |
|
Output 3.3 V |
Built-in voltage regulator provides power of external devices with a 3.3 V voltage with current consumption up to 1500 mA. |
Specification
- Supply voltage of the batteryport: 3.5 V to 6.5 V
- Supply voltage of the 5V port: 4.5 V to 5.5 V
- The supply voltage of the 3V3 port: from 2.97 V to 3.63 V
- Microcontroller: Intel Curie x86 (Quark)
- Maximum clock frequency: 32 MHz
- SRAM: 26 kb
- Flash memory: 196 kB
- I/O Ports: 15
- PWM outputs: 4
- Current of leads: 20 mA
- Built-In Bluetooth 4.0
- Built-in 6-axis accelerometer and 3-axis compass
- 5 V / 1.5 A converter
- Dimensions: 44 x 24 mm
- Weight: 6 g
Useful links |
