Product description: AP63203 - step-down buck converter with screw connector - 3,3V 2A - SparkFun COM-18356
Voltage regulator in the form of a step-down converter, made by SparkFun. AP63203 converter is designed to change input voltage from 3,8V to 32V to output: 3,3 V. Its current capability is 2 A with a fully integrated 125 mΩ MOSFET on the high side and a 68 mΩ MOSFET on the low side, providing highly efficient DC-DC conversion. All components are housed on a low profile board and enclosed in a TSOT26 enclosure. Voltage input / output can be provided in two ways: using screw connectors available on the board, or through holes with marked pins, where you can solder, for example, goldpin pins. In addition, the manufacturer has prepared a place on the bottom of the board where you can glue a heatsink to dissipate any heat from the board.
In our shop's assortment there are also other step-down converters available, as well as step-up and step-up / step-down converters.
Leadings of the AP63203 step-down converter and a visible place to glue the heatsink.Leads of the AP63203 step-down converter
The AP63203 step-down converter module has screw connectors and pins in the form of solder holes:
- 3V3 - output voltage 3.3 V
- GND - system ground
- VIN - input voltage from 3,8 V to 32 V
- EN - enable
The AP63203 version without screw connector is also available.
Specification of the AP63203 step-down converter
- Input voltage: from 3.8 V to 32 V
- Output voltage: 3,3 V
- Continuous output current: 2 A
- Reference voltage: 0.8 V ± 1%
- Resting current: 22 µA
- Switching frequency: 1.1 MHz
- Supports pulse frequency modulation (PFM):
- efficiency up to 80% at a light load of 1 mA
- Efficiency up to 88% with 5 mA load
- Patented design provides superior EMI reduction
- Frequency spread spectrum (FSS) for EMI reduction
- Protections:
- against over voltage
- Current
- Thermal shutdown
Step-down converter 3.3 V 2 A.
