Product description: Magigoo Pro Flex printing adhesive - 50 ml
Magigoo Pro Flex printing glue - 50 ml is a preparation that improves the adhesion of the first 3D print layers , intended for use with filaments: TPE , TPC and TPU . The product improves the bonding properties between the first layers of flexible filaments and the 3D printer 's worktable. Some elastic fibers show less adhesion to the worktop, therefore the use of glue before starting work improves the adhesion of the printout, thanks to which the process runs smoothly. The preparation acts as an intermediate layer between the printout and the top. In the case of larger prints and filaments with a high shrink ratio, it is recommended to use a 20 mm rim to ensure correct printing. The preparation has very good thermal properties that stabilize the material and chemical resistance. Due to the advantages of plastic, these materials are extremely sought after in industrial applications.
Magigoo Pro Flex printing adhesive - 50 ml.
Magigoo Pro Flex printing adhesive.
How to use the preparation
- Shake the bottle.
- Apply the preparation on the printer's worktop by pressing the nib on the printer's worktop.
- Print as recommended by the filament / printer manufacturer.
- Leave to cool and remove. The print should pop off immediately.
- Use a damp cloth to clean the worktop from the remnants of glue.
If the glue is too strong, use a little water to dissolve the agent, and then you can gently lift the printout to detach it from the 3D printer's worktop.
Useful links |
