- EOL
|
Attention! The product has been discontinued. Check others products incategory. |
Description of product: Grove - single-axis analog accelerometer of ± 100g (ADXL1001)
Single-axis analogaccelerometer of ± 100g (ADXL1001) withvery lownoise level and high frequency. Accelerometer is of industrial class MEMS, which is based on the system of ADI ADXL1001.Grove cable is in the kit.
Grove - single-axis analog accelerometer ± 100g (ADXL1001)
ADXL has a typical noise density of 30 µg / √Hzand linear frequency range from DCto 11 kHz(3 dB of point). The Grove ADXL 1001 module has a built-in function of a full electrostatic test (ST) and the indicator of exceedance (OR) which provides advanced functions at the system's level. The module is powered with the voltage from 3.3 V to 5.25 V, due to the low voltage, the accelerometer is ideal for various projects of Arduino and Raspberry Pi.
Grove - single-axis analog accelerometer
Features of the analog single-axis accelerometer from Grove
- Single-axis accelerometer with analog output
- The range of linear frequency response from DC to 11 kHz (3 dB point), resonance frequency of 21 kHz
- Ultra-low noise density of 30 µg / √Hz ± 100 g
- Entire electromechanical autotest
- Linearity of up to ± 0.1% of full range
- The stability of the sensitivity at 5%
- The sensitivity of the transverse axis ± 1% (ZX), ± 1% (YX)
| Sensors and modules of the Grove system is available atthis link |
Pins of the Grove module (ADXL1001)
| Pin | Description |
|---|---|
| 1. SIG |
Analog output signal |
|
2. NC |
Not connected |
| 3. VCC | Supply voltage from 3.3 V to 5.25 V |
| 4. GND | The ground of the system |
Technical characteristics of the accelerometer from Grove
- Supply voltage: from 3.3 V to 5.25 V
- Interface: analog
- Cross sensitivity of the axis ± 1% (ZX), ± 1% (YX)
- Linearity within ± 0.1% of measuring range
- Ultra-low noise density of 30 ug / √Hz in th erange of ± 100 g
- The kit includes the Grove cable
Useful links |
