- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product Description: Li-Pol/Li-Ion/Li-Fe/Ni-Mh/Ni-Cd charger with built-in balancer - Electro River Wave Charger - built-in power supply
ElectroRiver Wave Charger microprocessor-based charger with balancer. The charger has a built-in power supply so that it can be powered directly from the mains with a voltage of 100 / 240 V AC and has an additional socket for connecting power from 11 V to 18 V DC. Allows charging of cells such asLi-Pol, Li-Ion, Li-Fe, Li-HV, Ni-Cd, Ni-Mhand Pb.
Supported batteries:
- Lithium: Li-Pol / Li-Ion / Li-Fe - from 1S to 6S
- Nickel: Ni-Mh / Ni-Cd - from 1 to 15 cells
- lead-acid - from 2 V to 20 V
Contents of Electro River Wave Charger set.
We offer a wide range ofchargersand batteries, we encourage you to familiarize yourself withthem.
In addition, in thebattery accessoriescategory, you can find products such asdischarge indicatorsandprotective bags forbatteries.
Electro River Wave Charger terminals.
Key features of the Electro River Wave Charger
- Optimized software- the charger has an AUTO function that regulates the voltage during the charging or discharging process. This feature is especially useful for lithium batteries, where it is easy to overcharge the battery which can lead to damage or even explosion.
- Built-in balancer- allows you to monitor on each cell of the pack which allows you to equalize the voltage on each cell during the process of charging and discharging.
- Fast charge mode and lithium battery storage mode- the charger software allows you to quickly charge packs and charge them to the proper level for storage.
- Input power monitoring- because of the range in which the charger operates it is possible to power it with a car battery. If the voltage drops below the specified value, the charger operation will be automatically interrupted.
- Automatic charging current limitation - when charging Ni-MH or Ni-Cd batteries, it is possible to set the upper limit of charging current
Electro River Wave Charger Specifications
- Supply voltage:
- 100 / 240 V AC
- 11 V to 18 V DC
- Supported rechargeable batteries:
- Lithium: Li-Pol / Li-Ion / Li-Fe - from 1S to 6S
- Nickel: Ni-Mh / Ni-Cd - from 1 to 15 cells
- lead-acid - from 2 V to 20 V
- Maximum charging current consumption:
- 80 W (DC input)
- 50 W (AC input)
- Charging current range: from 0.1 A to 8 A
- Maximum current consumption on discharge: 10 W
- Discharge current range: 0.1 A to 2 A
- Li-Pol balancing current: 460 mAh / cell
- Dimensions: 135 x 145 x 43 mm
- Weight: 590 g
Operation of the charger is simple and intuitive.
