- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: Tinker Kit - set with RedBoard Atmega328 motherboard - SparkFun KIT-18577
Tinker Kit from SparkFun containing the RedBoard Atmega328 motherboard . The set allows you to make projects with a flashing LED, RGB backlight, "Simon Says" games and many others. The kit also includes LEDs, resistors, motors, buttons, servo and many other useful components.
Kit contents and component description
| LP | PICTURE | DESCRIPTION |
|---|---|---|
| 1 |  |
RedBoard Qwiic - compatible with Arduino - SparkFun DEV-15123 - board fully compatible with the latest Arduino Uno R3. |
| 2 |  |
Contact plate - has 400 holes and numbered fields. |
| 3 |  |
TB6612FNG - two-channel driver for 15V / 1.2A motors with connectors - SparkFun ROB-14450 - module with a two-channel driver for DC motors. |
| 4 |  |
Dagu DG01D-L DC motor - two 48: 1 4.5V motors with a double shaft and led wires. |
| 5 |  |
|
| 6 |  |
A set of 5 mm LEDs (20 pcs.) - 5 pieces of red, blue, green and yellow elements. |
| 7 |  |
Tact Switch 12x12mm - colored buttons - 4pcs. - SparkFun PRT-14460 - set of buttons with colored caps - 4 pcs. |
| 8 |  |
A slide switch - 2 positions, designed to turn the power on / off. |
| 9 |  |
|
| 10 |  |
RGB diode common cathode - LED with four leads, shining in all the colors of the RGB palette. |
| 11 |  |
A set of resistors (40 pcs.) - 20 pcs. Of elements with a value of 10 kΩ and 330 Ω. |
| 12 |  |
Micro A0090 servo with draglines - with a working range of 160 °. |
| 13 |  |
Temperature sensor TMP36 - analog thermometer supplied with the voltage from 2.7 V to 5.5 V with a measuring range from -40 ° C to 125 ° C. |
| 14 |  |
Photoresistor - a sensor that allows you to measure the intensity of the incident light, it will allow, for example, to detect whether the room is dark or light. The measuring range is from 1 kOhm to 10 kOhm. |
| 15 |  |
10k rotary potentiometer - equipped with a simple knob, can be used as a user interface element. |
| 16 |  |
Connecting cables 30 pcs . male - male with a length of 18 cm - allow you to create connections on the breadboard and between the board and the Arduino. |
| 17 |  |
USB A - USB B cable - 0.8 m long, black. |
