• EOL

Touch screen Waveshare C - resistive LCD 3,2'' 320x240px - 3.3V SPI

Index: WSR-04916

Touch TFT LCD display with a diagonal of 3.2" and a resolution of 320 x 240 px with 65536 colors. Works with a voltage of 3.3 V and communicates using the SPI bus and parallel interface. It is equipped with controllers ILI9325 - screen and XPT2046 - touch.

Touch screen Waveshare C - resistive LCD 3,2'' 320x240px - 3.3V SPI
€13.50
€10.98 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: Waveshare

Attention!

The product has been discontinued. Check others products incategory.

Description

Touch TFT LCD display with a diagonal of 3.2" and a resolution of 320 x 240 px with 65536 colors. Works with a voltage of 3.3 V and communicates using the SPI bus and parallel interface. It is equipped with ILI9325 controller - is responsible for the screen, and XPT2046 is responsible for the touch.

 

Leads are the holes with wsoldered goldpin connectors- 2.54 mm pitch. They allow the connection of the display via wires or attaching to the breadboard.

 

The manufacturer offers auser guide along withsample programs for FPGA and STM32.

Leads

The screen has the following leads:

 

PinSymbolDescription
1 5V

When the power supply is5 V, the pins 1 and 2 are the input pins

and the pins 33 and 34 are the output pins3.3 V.

2 GND Ground
3 D0 Data pins.
4 D1 Data pins.
5 D2 Data pins.
6 D3 Data pins.
7 D4 Data pins.
8 D5 Data pins.
9 D6 Data pins.
10 D7 Data pins.
11 D8 Data pins.
12 D9 Data pins.
13 D10 Data pins.
14 D11 Data pins.
15 D12 Data pins.
16 D13 Data pins.
17 D14 Data pins.
18 D15 Data pins.
19 CS Chip select LCD activated by low state.
20 RS

The choice of an registry of instruction(RS = 0)

or data (RS = 1).

21 WR Record (WR = 0, RD = 1).
22 RD Read (WR = 1, RD = 0).
23 RESET The reset is activated by low state.
24 NC Not connected.
25 BLVCC

Powered backlight 3.3 V or 5 V.

26 BLGND Ground of backlight.
27 BLCNT Adjusting the backlight using PWM.
28 TP_IRQ

Interruption of the display is activated by the low state when

the touch is detected.

29 TP_CS

Chip select from touch module

activated by low state.

30 TP_SCK

The clock line of SPI.

31 TP_SI The input data line connected toMOSI.
32 TP_SO The output data line connected toMISO.
33 3.3 V

When powering is 3,3 V, pins 1 and 2 are not connected pins,

and the pins 33 and 34 are the input pins 3.3 V.

34 GND Mass.

 

Specification

  • Supply voltage: from 3.3 V
  • Working voltage of leads: 3.3 V
  • Driver:
  • Screen diagonal: 3.2 inches
  • Resolution: 320 x 240 px
  • Color depth: 65536
  • Touch panel type: resistive
  • Backlight white LEDs
  • Communications: SPI
  • Board sizes: 95 x 62 mm

 

Screen - type LCD TFT
Screen - diagonal 3.2''
Screen - interface SPI
Screen - touch yes
Screen - resolution 320x240px
Test 4
Package width 0.001 cm
Package height 0.001 cm
Package depth 0.001 cm
Package weight 0.001 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: