- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description
The module is compatible with Arduino Leonardo with Atmega32u4 AVR microcontroller. It has 32 KB of Flash memory, 2.5 KB of RAM, 26 digital inputs/outputs, 7 of which can be used as PWM channels and 12 as analog inputs, as well as popular communication interfaces and a reader of the microSD cards. The advantage of the A-Star module, is the wide supply voltage range from 5 V to 36 V.
The distribution of elements on the A-Star Prime board.
Specification
- Supply voltage:
- From 5 V USB socket
- Outer VIN: 5 V to 36 V
- Microcontroller: ATmega32u4
- Flash memory: 32 kb
- SRAM: 2.5 KB
- Timing: 16 MHz
- Working voltage of leads: 5 V
- I/O pins: 26
- PWM channels: 7
- Number of analog inputs: 12
- Serial interfaces: UART, SPI, I2C
- Built-in USB full-speed controller
- External interrupts
- Installed microSD card reader
- Built-in pulse 5 V voltage regulator
- 3.3 V stabilizer with raisened current up to 300 mA
- The three LEDs at user's disposal
- Three buttons at user's disposal
- The RESET button
- Led-out ICSP connector to connect anexternal AVR programmer
- MicroUSB connector for programming (microUSBcablenot included)
- The module is compatible with Arduino IDE
- Soldered connectors compatible with Arduino
- Dimensions: 48,5 x 18 mm
- Weight: 3.5 g (without connectors)
|
The advantage of A-Star SV module, is applied pulse voltage regulator which provides power from a wide range: from 5 V to 36 V. The scheme is compatible with the popular Arduino Leonardo version. |
Leads
The figure above shows the distribution of leads of the A-Star Mini module from the Pololu company. With yellow marked were pins I/O (input/output) with names in accordance with the ATmega32u4 documentation, with green color marked were analog inputs of the A/C converter.
|
Attention! Before connecting, readthe installation guide. |
Programming
Creating and downloading software, is allowed by the free environment of the Arduino IDE.Implemented bootloader allows you to send the program directly via the microUSB cable. A detailed description can be found inthe instructionssupplied by Pololu.
Stabilizer pulse
The board was equipped with pulse5 V voltage regulator with high efficiency: 80 to 90%.
The efficiency of the system depending on the consumed current for different values of input voltage.
Useful links |
