- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: Feather M0 Proto 32-bit - Arduino compatible - Adafruit 2772
Portable projects
Feather controller is dedicated for mobile projects. Thanks to built-in connector it can be powered from LiPol 3.7 V battery. Battery voltage has been led out through the analog pin, so you can constantly control the state of charge of the lipol. Power supply from microUSB port is also available.
Programming (Arduino environment)
Module can be programmed using Arduino IDE environment. To do that, you need to configure the software as described by the manufacturer and connect the board via microUSB cable. Settings of Arduino IDE environment are available on manufacturer's website.
Feather M0 Proto 32-bit.
Specification
- Supply voltage: 3.7 V lipol or 5 V USB socket
- ATSAMD21G18 ARM Cortex M0 3.3 V microcontroller:
- Flash memory: 256 kB
- SRAM: 32 kB
- Clocking: 48 MHz internal oscillator
- Installed Arduino bootloader
- Works with modified version of Arduino IDE
- MicroUSB connector for programming, you'll find appropriate cablein our offer
- Built-in 3.3V voltage regulator with up to 500mA current capacity
- Can be powered from USB port or 3.7V lipol battery
- 20 GPIO pins
- 20 PWM pins
- 6 analogue inputs (one for battery voltage measurement)
- 1 x analog output
- Built-in 100 mA lipol charging module with status LED
- LED for pin 13
- Reset button
- Dimensions: 51 x 23 x 8 mm
- Weight: approx. 5 g
Feather M0 Proto 32-bit - compatible with Arduino - Adafruit 2772
We offer unique, small board from popular Adafruit brand. It's a module named Feather M0 Proto, which is compatible with Arduino, uses ATSAMD21G18 ARM Cortex M0 microcontroller with 256 kB Flash memory, 32 kB SRAM memory, clocking at 48 MHz.
The device has Arduino bootloader installed, so it can work with modified version of Arduino IDE environment. To program, simply connect the device via USB cable (not included).
Small, lightweight module compatible with Arduino Zero
Feather M0 Proto board has 20 GPIO pins, all of which can send PWM signals, and 6 of them can work as analog inputs (for example, to analog temperature sensors). The device is also equipped with modules enabling power supply and charging with lithium-polymer cells (3.7 V).
In our offer you may find much more modules compatible with Arduino Uno, Arduino Pro Mini or Arduino Mega boards.
