• Reduced price

SparkFun Qwiic Shield for Teensy - Extended - DEV-17119

Index: SPF-19172 EAN: 5904422370459
Overlay produced by SparkFun for Teensy series modules such as Teensy 4.1, Teensy 3.6 and Teensy 3.5. The board extends the Teensy module with four additional Qwiic connectors for connecting modules/sensors using the same connector. There are two straight connectors and two straight and two Qwiic angle connectors on the overlay. Modules communicating via the I2C interface can be connected to the Qwiic connector. Qwiic ecosystem makes it much easier to connect sensors / modules to main module with the same connector, no soldering required and gives assurance of correct connection. There is also a PROG button on the board, which serves the same function as the PROG button on the Teensy board.
SparkFun Qwiic Shield for Teensy - Extended - DEV-17119
€6.50 -10%
€5.85
€4.76 tax excl.
Lowest price 30 days: €5.61
Available
Shipping in 24 hours
PayPal payment
Manufacturer: SparkFun

Product description: SparkFun Qwiic Shield for Teensy - extended - DEV-17119

Overlay manufactured bySparkFunforTeensyseries modules such as Teensy 4.1, Teensy 3.6 ora Teensy 3.5. The board extends the Teensy module with an additionalfourQwiicconnectors for connecting modules / sensors using the same connector. There are two straight connectors and two straight and two Qwiic angle connectors on the overlay. Modules communicating via the I2C interface can be connected to the Qwiic connector. Qwiic ecosystem makes it much easier to connect sensors / modules to main module with the same connector, no soldering required and gives assurance of correct connection. There is also a PROG button on the board, which serves the same function as the PROG button on the Teensy board. Included with the Qwiic overlay is a set of pins that you need to solder to the board yourself.

Qwiic allows you to connect sensors via the I2C bus, making prototyping faster and less error prone. Polarized connections mean you can't misconnect it. All Qwiic connectors have 4-pin leads with a 1 mm pitch.
Nakładka ze złączami Qwiic overlay comes with connectors for self soldering.

Main features of Qwiic Shield Extended for Teensy

  • Compatible with Teensy 4.1 and Teensy 3.6 or Teensy 3.5
  • 4 Qwiic connectors (two straight and two angled)
  • PROG button - performs the same function as on the Teensy board
  • I2C jumper
  • 3.3 V line and GND

Qwiic connectors on the board

There are four Qwiic connectors on the Qwiic Shield Extended overlay. Two straight connectors are located at the ends of the board, while two angled ones are located in the middle of the board.

We also offer abasic version

for Teensy 3.1, Teensy 4.0 and Teensy LC modules.

SparkFun Teensy

SparkFun Teensy module is a small board equipped with 32-bit microcontroller withARM Cortex M4core clocked at 120 MHz, 512 kB of Flash memory and 192 kB of RAM. Teensy3.5has 62 input/output pins of which 20 PWM channels and 25 analog inputs, a DMA controller and popular communication interfaces: SPI, I2C, I2S, CAN. The Teensy pins operate at 3.3V.

Przykład podłączenia z TeensyExample of overlay connection with Teensy and Qwiic display.
Package width 7.5 cm
Package height 0.5 cm
Package depth 7 cm
Package weight 0.011 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: