Description
The module is an extension for moduleArduino that connect to Ethernet network. The service is simplified by the library together with intuitive documentation and numerous examples. Shield is also a reader of microSD memory cards, which allows to store more data.
The subject of the sale is only the shield. The Arduino Uno can be purchased separately in our store.
Specification
- Working voltage: 5 V (powered from Arduino pins)
- Ethernet controller: W5500 with buffer of 32 KB
- Data transfer rate: 10/100 MB
- Communication: SPI bus
- Built-in microSD memory card reader
- Available from the level of a standard SD Card library
- Pin SS of the SPI bus is at the pin no. 4
- Built-in RJ45 connector
- The possibility to connect the module PoE- power over Ethernet
- The module has the following status LEDs:
- ON - signals the proper powering
- LINK - indicates a connection to the network
- FDX - indicates the connection in full duplex mode
- 100M - indicates the communication with the speed of 100 Mbit/s
- ACT - flashes when using pins RX and TX
- Led out RESET button of the Arduino
- Shield is compatible withArduino UnoandMega(does not support Arduino Zero Pro M0)
In addition to the Ethernet slotr and the card reader, device has: connectors for PoE module, leads of Arduino pins, RESET button, LEDs, and additional slots to the communication buses, for example, TWI (I2C).
ThingSpeak platform for Arduino and Raspberry Pi IoT.
Useful links |
