- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description
A module made by SparkFun with an STM32 microcontroller with ARM Cortex M3 core with a clock frequency of 120 MHz with 1 MB of Flash memory and 128 KB of RAM. It has 8 digital inputs/outputs, PWM channels, 6 analog inputs, as well as popular communication interfaces. The distribution of connectors is compatible with the Arduino, so you can use the shields. The system is supplied with the voltage from 4.5 V to 15 V via DC slot or 5V via micro USB connector. Digital pins are working with a voltage of 3.3 V.
|
The device works with programming in the cloudparticles.io. Detailed information about the programming and maintenance of wi-fi is available inthe user's guide. |
The Wi-Fi communication
Thanks to the installed wi-fi module, the user can, in a simple way, connect to a network. The system is compatible with standard 2.4 GHz IEEE 802.11 b/g/n, supports securities:Open, WEP, WAPI, WPA and WPA2-PSK.
Programming
The device works with programming in the cloudparticles.io. Detailed information about the programming and maintenance of wi-fi is available inthe user's guide.
|
Pins of RedBoard Photon work with a voltage of 3.3 V. |
The distribution of elements on the Photon SparkFun board.
Specification
- Supply voltage: 4.5 V to 15 V
- Integrated wi-fi module in 2.4 GHz IEEE 802.11 b/g/n standard
- Supported security modes: Open, WEP, WAPI, WPA and WPA2-PSK
- The module is compatible with Particle P1 (documentation)
- Programmed via microUSB slot
- The whole is made in SMD technology
- MCU: Cortex M3 STM32F205ARM
- Maximum clock frequency: 120 MHz
- SRAM: 128 KB
- Flash memory: 1 MB
- I/O Ports: 8
- Number of analog inputs: 6 (channels of A/C converter)
- Serial interfaces: UART, SPI, I2C
- RedBoard Photon pins work with a voltage of 3.3 V
- Built-in JTAG interface is compatible with ST-Link/v2 JTAG, led-out on 20-pin connector, godlpin strips must be purchased separately are to self-soldering
- The distribution of pins, compatible with Arduino Uno, Leonardo
In our offer, you will also find starter kitwith board Redboard Photon.
Useful links |
