Product description: ESP32-S2-DevKitC-1 - WiFi - development board with the ESP32-S2-SOLO system
ESP32-S2-DevKitC-1 development board , based on the ESP32-S2-SOLO system. Enables wireless WiFi communication in the 2.4 GHz band. It has 4 MB of Flash memory, 320 kB of SRAM memory (including 16 kB of RTC memory) and 128 kB of ROM memory. The module is equipped with configurable pins (GPIO) and a PCB antenna. In addition, the board has many useful elements, such as an LED indicating 3.3 V power supply , a USB-UART interface for fast data transfer, and Reset and Boot buttons for easy restarting and software upload.
ESP32-S2-DevKitC-1- WiFi.
ESP32-S2-DevKitC-1 development board based on the ESP32-S2-SOLO system.Main features of the tile
- Equipped with the ESP32-S2-SOLO system, ensuring complete WiFi functionality.
- Pin interfaces are accessible on both sides of the board, making it easy to connect peripherals.
- The module has a PCB antenna for greater design flexibility.
- 3.3V power indicator LED for simple power status monitoring.
- USB-UART port enabling fast data transfer between the board and the computer.
- Reset and boot buttons make it easier to restart the board and upload the software.
- Rich documentation to facilitate the exploration of all functions of the ESP32-S2-DevKitC-1 board.
Arrangement of elements on the board
- ESP32-S2-SOLO system
- 3.3 V LED - lights up when power is connected to the board
- Addressable RGB LED
- USB-UART bridge - provides transfer speeds of up to 3 Mbps
- GPIO pinout
- ESP32-S2 USB port
- Reset button
- Boot button
- USB-UART port
- GPIO pinout
- LDO power regulator from 5V to 3.3V
Arrangement of elements and pins.
ESP32-S2-DevKitC-1- WiFi - development board with the ESP32-S2-SOLO system.
Technical specifications of ESP32-S2-DevKitC-1
- Chip: ESP32-S2-SOLO
- Processor: Single-Core 32-bit Xtensa
- Clock: up to 240 MHz
- Wireless communication: WiFi 4
- WiFi standard: IEEE 802.11 a/b/g/n
- Band: 2.4 GHz
- SRAM memory: 320 kB (including 16 kB in RTC memory)
- ROM memory: 128 kB
- Flash memory: 4 MB
- Interface: 43x GPIO, 4x SPI, 2x UART, 2x I2C
