Product description: 3.5'' 480x320px resistive LCD IPS touch screen - SPI - 65K RGB - for Raspberry Pi Pico - Waveshare 19907
IPSdisplaymodule manufactured by Waveshare, designed to work withRaspberry Pi Picoboard. The display is based onILI9488chip withXPT2046resistive touch controller and communicates viaSPIinterface. The screen diagonal is3.5"and its resolution is480 x 320 px. It is capable of displaying 65 thousand colors included in RGB gamma. The size of a single pixel is 0.153 x 0.153 mm. The board is also equipped with a microSD card slot.
3.5" 480 x 320 px IPS display designed for use with Raspberry Pi Pico.Product compatible with RaspberryPi Pico
The manufacturer provides aWiki page for the product, which includes information about the module's pinouts and a detailed user guide. You will also learn from it how to connect the display.
Display module pinouts for Raspberry Pi Pico.Display module pinouts for Pico
The module has a female socket where you can either plug the Raspberry Pi Pico board directly into or make the connection using wires. Among the pins there are:
- VSYS - supply voltage 5 V
- GND - ground
- GP5|SDIO_CLK - SDIO clock line
- GP9|LCD_DC - LCD data / command line
- GP10|CLK - SPI clock line
- GP11|MOSI - data output (master output slave input)
- GP12|MISO - data input (master input slave output)
- GP13|LCD_BL - LCD backlight
- GP15|LCD_RST - reset LCD
- GP16|TP_CS - touch controller chip selection
- GP17|RP_IRQ - touch controller interrupt pin
- GP18|SDIO_CMD - SDIO CMD pin
- GP19|D0 - SDIO D0 pin
- GP20|D1 - pin SDIO D1
- GP21|D2 - pin SDIO D2
- GP22|SD_CS/D3 - pin SDIO CS/D3
Display specification
- Operating voltage: 5 V
- Interface: SPI
- Display type: IPS
- Layout: ILI9488
- Touch controller: XPT2046
- Touch: resistive
- Diagonal: 3,5"
- Resolution: 480 x 320 px
- Display size: 73.44 x 48.96 mm
- Module dimensions: 86 x 57.20 mm
Set contents
- 3.5" display
- 4 x spacer
The item is the display, Raspberry Pi Pico module can be purchased separately.
