Intel Edison Interface Pack KIT-13095
Intel Edison Interface Pack KIT-13095
Intel Edison Interface Pack KIT-13095 - zdjęcie 1
Intel Edison Interface Pack KIT-13095 - zdjęcie 2

Set of interfaces for Intel Edison - SparkFun Block

Index: SPF-01790

Four boards are included to connect communication interfaces to the Intel Edison module: I2C bus, PWM signal, ADC and dual DC motor controller.

€63.95
€51.99 tax excl.

Unavailable
Discontinued product
30-day returns
Manufacturer: SparkFun

Attention!

The sale of the product has been completed. Check other devices in this category.

Description

Intel Edison is a computing platform based on a powerful dual-core Intel Atom processor, equipped with WiFi, Bluetooth and a 70-pin connector.

Interface Pack  Intel Edison

The kit includes 4 interface boards - Intel Edison platform can be purchased separately.

The set includes four boards for connecting communication interfaces to the Intel Edison module.

  • I2C Block - a module with a voltage converter, allowing to connect devices on the I2C bus to the Intel Edison platform.
  • PWM Block - a board equipped with eight PWM channels, controlled via the IC bus. Built-in PCA9685 controller has an independent clock with 50 Hz and 12 bit resolution, which allows to control e.g. model servo.
  • ADC Block - module with ADS1015 delta-sigma analog-digital converter with 12 bits resolution. It communicates through the I2C bus. Sampling speed is maximum 2.2 kHz, which unfortunately is not enough to capture the sound, but allows you to read data from different types of analog sensors.
  • H-Bridge Block - a two-channel direct current motor controller . It enables control of motors supplied with voltage from 2.7 V to 15 V, and its maximum current capacity is 1 A.

Same day shipping

Posting the payment for the order on our account on a business day up to 10 AM means sending the goods on the same day!

The time of payment depends on the ELIXIR's hours session of the sender's bank and the recipient of the transfer. It may take up to 2-4 working days.

Free delivery for orders exceeding 300 PLN!

Only for prepaid orders shipped to Poland.

Terms of delivery outside of Poland

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Slovakia

  • Delivery time: 2-4 days
  • Delivery cost: 35 PLN
  • Insurance: 5000 PLN
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: 50 PLN
  • Insurance: 5000 PLN
Kurier GLS - zone 3

Finland, Greece, Ireland, Sweden, Cyprus, Malta, Spain

  • Delivery time: 2-7 days
  • Delivery cost: 80 PLN
  • Insurance: 5000 PLN

Terms of delivery in Poland

Card image cap
Poczta Polska
  • Delivery time: 1-3 days
  • Payment in advance: od 9,90 PLN
  • Cash on delivery: 17,90 PLN
  • Insurance: 1000 PLN
Card image cap
Kurier GLS
  • Delivery time: 1-2 days
  • Payment in advance: od 14,90 PLN
  • Cash on delivery: 22,90 PLN
  • Insurance: 6000 PLN
Card image cap
Paczkomaty 24/7
  • Delivery time: 1-3 days
  • Payment in advance: od 12,90 PLN
  • Over 8000 parcel lockers
  • Insurance: 200 PLN
  • Free delivery of orders over 300 PLN does not apply to parcels addressed outside of Poland.
  • The delivery period is counted in working days from the date of dispatch of the order.

Be the first to ask a question about this product!

No customer reviews for the moment.

Customers who bought this product also bought:

Power module for Intel Edison

The module allows you to connect a li-on battery (single cell) to the Intel Edison console. Batteries can be charged using a USB cable.
Index: SPF-01862
Index: SPF-01862
Unavailable
Regular price €23.02 Price €23.02

USB OTG to Intel Edison - SparkFun Block

The module allows you to connect various types of peripheral devices with a USB connection, such as a mouse or flash drive to Intel Edison. It is equipped with microUSB OTG AB...
Index: SPF-02093
Index: SPF-02093
Unavailable
Regular price €30.00 Price €30.00

Intel Edison + Arduino Breakout Kit

Included is Intel Edison platform with Arduino Uno compatible board. Thanks to its use the user can connect so called Arduino Shields and use digital outputs known from Arduino.
Index: SPF-02593
Index: SPF-02593
Unavailable
Regular price €46.28 Price €46.28

Sensor kit for Intel Edison - SparkFun Block

The set includes sensors that allow the platform Edison read, write and display information. The set includes 3 boards (blocks) connected to the Intel module, IMU, display and...
Index: SPF-01861
Index: SPF-01861
Czas oczekiwania: ok. 10-30 dni
Regular price €64.88 Price €64.88

GPIO module for Intel Edison

The module allows you to output GPIO pins from Intel Edison's computing platform to holes suitable for soldering the popular 2.54 mm goldpin connector - raster.
Index: SPF-00891
Index: SPF-00891
Unavailable
Regular price €13.72 Price €13.72

Intel Edison + Mini Breakout Kit

The Intel Edison platform is included in the package, along with a bootable disc that allows power, GPIO and USB ports to be connected.
Index: SPF-01128
Index: SPF-01128
Unavailable
Regular price €92.79 Price €92.79

Set of goldpin raster 2,54mm - maxi

The set includes the popular goldpin connectors, 2.54 mm pitch: straight male 1x40 and 2x40 strap, male angled 1x40 and 2x40 strap, female 1x40 and 2x40 strap. In addition, the...
Index: KAB-01451
Index: KAB-01451
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.30 Price €2.30

Arduino Mega 2560 Rev3 - module A000067

Popular module with microcontroller AVR ATmega2560 . It has 256 KB Flash memory, 8 KB RAM, 54 digital inputs/outputs, of which 15 can be used as PWM channels, 16 analog...
Index: ARD-01062
Index: ARD-01062
In stock, shipping 24 hours!
(Check quantity)
Regular price €36.98 Price €36.98

Arduino Yun - WiFi + Ethernet

Connection of Arduino and Linux allows to program and control the device wirelessly via WiFi network. Module based on ATmega32u4 chip , has 32 kB of flash memory, 2.5 kB of...
Index: ARD-01859
Index: ARD-01859
Unavailable
Regular price €69.53 Price €69.53

GPS Shield for Arduino - set with GPS receiver EM-506

Overlay for connecting the GPS receiver to Arduino. The set includes: GPS Shield board, EM- 506 GPS receiver, connection cable and set of connectors for Arduino.
Index: SPF-03367
Index: SPF-03367
Unavailable
Regular price €60.23 Price €60.23

StarterKit for Intel Edison / Galileo

A set of electronic module components that will make it easier to get started with the Intel Edison or Galileo platform. Included are a pinout, push-button display, LEDs, servo...
Index: DFR-03564
Index: DFR-03564
Unavailable
Regular price €60.23 Price €60.23

Heat shrink tube 1.6/0.8 red - 10pcs

The diameter before heat shrink: 1.6 mm diameter after heat shrink: 0.8 mm. Price for 10 x 1 meter.
Index: NSZ-00085
Index: NSZ-00085
Czas oczekiwania ok. 10-30 dni
Regular price €1.79 Price €1.79

Products from the same category

DC Motor - Tamiya 980112M Mabuchi FA-130

Small metal motor reaching 12,300 rpm with a supply voltage of 3 V.
Index: PLL-00138
Index: PLL-00138
Unavailable
Regular price €1.98 Price €1.98

Micro-Match connector - 10 pin socket

Micro-Match connector for 10-pin printing.
Index: UCC-00283
Index: UCC-00283
Unavailable
Regular price €0.21 Price €0.21

Micro-Match connector for 10-pin tape

Micro-Match connector on 10-vein tape with a pitch of 1.27 mm.
Index: UCC-00285
Index: UCC-00285
Unavailable
Regular price €0.91 Price €0.91

Pololu LPY550AL 2-axis XZ gyroscope

A sensor for measuring angular speed in two axes: XZ. It has a choice of measuring range: to ±500 °/sec, ±2000 °/sec. It has an integrated voltage regulator and analogue...
Index: PLL-00493
Index: PLL-00493
Unavailable
Regular price €15.12 Price €15.12

3-axis magnetometer, digital MAG3110

3-axis magnetometer in a small case DFN. Measuring range: ±1000 uT. Sensitivity at 0.1 uT. The communication interface is I2C bus.
Index: SES-00964
Index: SES-00964
Unavailable
Regular price €1.86 Price €1.86

HiTechnic color sensor - for Lego Mindstorms EV3 and NXT

The sensor together with the sensor and the intensity is vision Lego NXT robot. The sensor is able to distinguish between all colors including the colors of the blocks.
Index: ROB-00982
Index: ROB-00982
Unavailable
Regular price €55.58 Price €55.58

Servomechanism - Lego Mindstorms NXT

The servo can serve as the actuator of the robot. The device allows precise movement accurate to 1 degree.
Index: ROB-00986
Index: ROB-00986
Unavailable
Regular price €32.33 Price €32.33

USB Bluetooth adapter - Lego Mindstorms NXT

Adapter USB-Bluetooth allows the wireless exchange of data between computers, PC or Mac and the NXT device.
Index: ROB-00987
Index: ROB-00987
Unavailable
Regular price €39.30 Price €39.30

Gift voucher - PLN 50

Gift certificate worth PLN 50.
Index: BON-01044
Index: BON-01044
Unavailable
Regular price €11.63 Price €11.63

Gift Card - 300zł

Gift certificate worth PLN 300.
Index: BON-01045
Index: BON-01045
Unavailable
Regular price €69.77 Price €69.77

Receiver module GPS-FGPMMOPA6H GPS

Receiver module based on MT3339 chip in the surface soldered case - SMD. It has a built-in antenna and the possibility to connect the external version.
Index: UCC-01233
Index: UCC-01233
Unavailable
Regular price €23.23 Price €23.23

Bluetooth antenna ANT9520-245

Internal Bluetooth antenna, ZigBee, WLAN in SMD housing. Works on the frequency: 2.45 GHz in 200 MHz, 1.5 dBi band. Dimensions of the housing are 9.5 x 2.0 x 1.0 mm .
Index: SES-01263
Index: SES-01263
Unavailable
Regular price €0.58 Price €0.58