- EOL
Attention! The product has been discontinued. Check other products in category. |
Product description: Odyssey - X86J4125864 - Intel Celeron J4125 + ATSAMD21 8 GB RAM 64 GB eMMC WiFi + Bluetooth - Seeedstudio 102110540
Odyssey X86J4125864 minicomputer equipped with Intel Celeron J4125 Quad-Core processor clocked from 2.0 GHz to 2.7 GHz with Intel UHD 600 graphics system, and ATSAMD21 ARM Cortex M0 + coprocessor . It has 8 GB of LPDDR4 RAM and 64 GB eMMC with pre-installed Windows 10 Enterprise . There is a WiFi dual band module and Bluetooth 5.0 on board. The board has been equipped with two gigabit Ethernet connectors, three USB ports (2x USB 2.0 and 1x USB 3.1), audio inputs / outputs, USB type C connector for power supply, HDMI 2.0 connector and SATA slot, as well as two M.2 PCI connectors- e. Additionally, it has a microSD and SIM card slot . At the bottom of the board there is a large heat sink with a fan , which ensures effective cooling of the entire system.
The Odyssey board has an integrated Arduino ATSAMD21 coprocessor.
Special features of the module
- Equipped with a quad-core Intel Celeron J4125 processor clocked from 2.0 GHz to 2.7 GHz
- It supports WiFi wireless communication in the 2.4 GHz and 5 GHz bands and Bluetooth 5.0
- It has an Intel UHD 600 graphics card
- Equipped with Dual Gigabit Ethernet, with which you can easily build an OpenWrt and pfSense project
- With the Odyssey - X86J4125, you can build your own NAS (Network-Attached Storage) server, high-performance virtual router or 4G LTE gateway in IoT applications.
- It has an integrated Arduino ATSAMD21 ARM Cortex M0 + coprocessor
- The board is equipped with 40-pin GPIO connectors compatible with the Raspberry Pi
- Equipped with 2x M.2 PCIe connectors (Key B and Key M)
- Supports Windows 10 and Linux operating system
- It is compatible with the Grove series ecosystem
Operating system for Odyssey
The minicomputer works with Windows and Linux. The system can be installed on the built-in 64 GB eMMC memory. Create a bootable USB drive with the system and then install it on the Odyssey memory.
Power supply for minicomputer
Odyssey X86J4125864 has two connectors designed to supply power: USB type C and DC 5.5 / 2.1 mm . The USB C connector supports Power Delivery, the power supply voltage should be 15 V, and in the case of power supply via the DC 5.5 / 2.1 mm connector, the voltage should be in the range from 12 V to 19 V. The set includes a power supply with a DC 5.5 / 2.1 mm connector.
Odyssey - X86J4125864 - Intel Celeron J4125 + ATSAMD21 8 GB RAM 64 GB eMMC WiFi + Bluetooth - Seeedstudio 102110540.
Communication in Odyssey
Odyssey X86J4125864 is equipped with basic communication interfaces that can be found in typical PCs. The user has at his disposal:
- three USB type A connectors (2x USB 2.0, 1x USB 3.1), to which peripheral devices such as a mouse and keyboard can be connected, as well as a USB stick for installing the operating system. The number of ports can be extended using, for example, a USB HUB .
- two Gigabit Ethernet slots , which they give the ability to connect to the LAN network with a cable, the maximum data transfer speed is 1000 Mb / s.
- GPIO 40-pin and 28-pin - connectors compatible with Raspberry Pi and Arduino . They can be used to connect various sensors, diodes, motor drivers. They include popular interfaces such as: I2C, SPI, UART.
- MicroSD / SIM / SATA / PCI-e slots allow you to place a SIM card for communication in the 4G network (with an optional shield), a microSD card, SSD or M.2 disk as a storage medium.
Kit contents
- Odyssey mini computer - X86J4125864
- Power Supply
- SATA cable
- Antenna x2
- RTC battery
- Heatsink - built-in
- Fan - built-in
Specification and comparison of Odyssey minicomputers
TECHNICAL SPECIFICATIONS | |||
---|---|---|---|
Model | Odyssey X86J4105800 - 102110399 | Odyssey X86J4125864 - 102110540 | |
BASIC INFORMATION | |||
Processor |
Intel Celeron J4105 |
Intel Celeron J4125 |
|
Coprocessor | ATSAMD21G18 32-bit ARM Cortex M0 + |
ATSAMD21G18 32-bit ARM Cortex M0 + |
|
Graphics |
Intel UHD Graphic 600 |
Intel UHD Graphic 600 |
|
RAM | LPDDR4 8 GB | LPDDR4 8 GB | |
Internal storage | lack | eMMC 64 GB | |
Operating system | Windows, Linux | Windows, Linux | |
Wireless communication | WiFi 802.11 a / b / g / n / ac dual band 2.4 GHz / 5 GHz HT160 Bluetooth 5.0 |
WiFi 802.11 a / b / g / n / ac dual band 2.4 GHz / 5 GHz HT160 Bluetooth 5.0 |
|
Network | Intel I211AT PCIe Gigabit LAN It supports Wake-On-LAN and PXE |
Intel I211AT PCIe Gigabit LAN It supports Wake-On-LAN and PXE |
|
Dimensions | 110 x 110 mm | 110 x 110 mm | |
INTERFACES | |||
Audio |
3.5mm mini jack |
3.5mm mini jack |
|
Connectors |
1x 40-pin compatible with Raspberry Pi |
1x 40-pin compatible with Raspberry Pi |
|
USB |
2x USB 2.0 type A |
2x USB 2.0 type A |
|
Video |
HDMI 2.0a: up to 4096 x 2160 px / 60 Hz 24 bpp |
HDMI 2.0a: up to 4096 x 2160 px / 60 Hz 24 bpp |
|
Expansion Slots |
M.2 (Key B, 2242/2280): SATA III, USB 2.0 |
M.2 (Key B, 2242/2280): SATA III, USB 2.0, UIM |
|
RTC | JST 1.0 CR2032 3V (included) | JST 1.0 CR2032 3V (included) | |
TPM | Built-in TPM (2.0) | Built-in TPM (2.0) | |
Power | DC Jack 5.5 / 2.1 mm or USB type C PD DC Jack: 12 V to 19 V / 2 A USB Type-C: 12V / 2A |
DC Jack 5.5 / 2.1 mm or USB type C PD DC Jack: 12V to 19V USB Type-C: 15V |