- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: Odyssey X86J4105800 - Intel Celeron J4105+ATSAMD21G18 8GB RAM WiFi+Bluetooth - Seeedstudio 102110399
Odyssey X86J4125800 minicomputer based on Intel Celeron J4125 Quad-Core processor working from 1,5 GHz to 2.5 GHz with Intel UHD Graphic 600 and ATSAMD21 Cortex M0+ coprocessor. It has8 GB of RAM, built-in 2.4GHz / 5GHz dual band WiFi chip and Bluetooth 5.0. GPIO outputs are 40-pin RaspberryPicompatibleand28-pin Arduino compatible. There are also two Ethernet Gigabit connectors, audio inputs and outputs, three USB ports (2x USB 2.0 and 1x USB 3.0), a USB type C power connector, an HDMI and SATA connector, and a PCI-e. Additionally it has amicroSD andSIM card slot. On the bottom of the board there is alarge heat sink, which ensures effective cooling of the whole system.
Presentation of Odysstey X86J4105800 mini-computer.
|
Three versions available in the offer:
|
What do you need to run the Odyssey X86J4105800 minicomputer?
- MicroSD memory card or SSD / M.2 -the media on which the operating system will be installed
- The power supply:
- 12 V / 2 A - 5.5 / 2.1 mm DC jack or C-type USB connector (power supply with DC plug included)
- HDMI orUSB Ccable- to connect the device to a monitor
- Mouse and keyboard- to control and enter data into the device
- Connected internet - for software download
Front panel of the minicomputer.
Operating system for Odyssey
Odyssey X86J4125 works withWindows and Linux.This version of minicomputer has no built-in eMMC memory. You need to createa bootable USB stickand install the system on amemory card orSSD / M.2 previously placed in the module.
Presentation of the work of a minicomputer with Windows.
Communication in Odyssey X86J4105800
The minicoputer is equipped with basic communication interfaces that can be found in PCs. The user has it at his disposal:
- three USB connectors (2xUSB 2.0, 1x USB 3.0), under which you can connect peripheral devices such as mouse and keyboard, as well as a USB stick to install the operating system. The number of ports can be extended using e.g. HUBUSB.
- Ethernet ports,the possibility to connect to the LAN using a cable, the maximum data transfer speed is 1000 Mbps.
- GPIO 40-pin and 28-pin GPIOconnectors are compatible with Raspberry Pi and Arduino. They can be used to connect various sensors, diodes, motor controllers. They include such interfaces as: I2C, SPI, UART.
- MicroSD / SIM / SATA / PCI-e slots,allow you to place a SIM card for communication in 4G network (with optional overlay), microSD card, SSD or M.2 drive as a memory carrier.
Connectors layout on the Odyssey X86J4105800 board.
Minicomputer power supply
The odyssey can be powered viaUSB type C or DC 5.5 / 2.1 mm. USB connector C supports Power Delivery, supply voltage is 12 V/ 2 A.When powered via the DC connector, the power supply voltage should bebetween 12 V and 19 Vand the current capacity of the power supply should be 2 A. A 12 V / 2 A power supply unit with 5.5 / 2.1 mm DC plug and replaceable caps is included.
Rear minicomputer panel including microSD/SIM card slot as well as USB 3.0, USB C and mini jack.
Specification and comparison of Odyssey minicomputers
| Technical Specification | ||||
|---|---|---|---|---|
 |
|
|
||
| Model | Odyssey X86J4105800 - 102110399 | Odyssey X86J4105864 - 102110397 | Odyssey X86J4105864 - 102110398 | |
| Basic information | ||||
| Processor |
Intel Celeron J4105 1,5 GHz to 2.5 GHz |
Intel Celeron J4105 1.5 GHz to 2.5 GHz |
Intel Celeron J4105 1.5 GHz to 2.5 GHz |
|
| Coprocessor | ATSAMD21G18 32-bit ARM Cortex M0+ |
ATSAMD21G18 32-bit ARM Cortex M0+ |
ATSAMD21G18 32-bit ARM Cortex M0+ |
|
| Graphics |
Intel UHD Graphic 600 from 250 MHz to 750 MHz |
Intel UHD Graphic 600 from 250 MHz to 750 MHz |
Intel UHD Graphic 600 from 250 MHz to 750 MHz |
|
| Memory RAM | LPDDR4 8 GB | LPDDR4 8 GB | LPDDR4 8 GB | |
| Internal memory | No | eMMC 64 GB | eMMC 64 GB | |
| Operating system | Windows, Linux | Windows, Linux | Windows 10 Enterprise activated | |
| Wireless communication | WiFi 802.11 a/b/g/n/ac dual band 2.4 GHz / 5 GHz HT160 Bluetooth 5.0 |
WiFi 802.11 a/b/g/n/ac dual band 2.4 GHz / 5 GHz HT160 Bluetooth 5.0 |
WiFi 802.11 a/b/g/n/ac dual band 2.4 GHz / 5 GHz HT160 Bluetooth 5.0 |
|
| Network | Intel I211AT PCIe Gigabit LAN Supports Wake-On-LAN and PXE |
Intel I211AT PCIe Gigabit LAN Supports Wake-On-LAN and PXE |
Intel I211AT PCIe Gigabit LAN Supports Wake-On-LAN and PXE |
|
| Dimensions | 110 x 110 mm | 110 x 110 mm | 110 x 110 mm | |
| Interfaces | ||||
| Audio |
Mini jack 3.5 mm Microphone + headphones |
Mini jack 3.5 mm Microphone + headphones |
Mini jack 3.5 mm Microphone + headphones |
|
| Connections |
1x 40-pin compatible with Raspberry Pi 1x 28-pin SAMD21G18 connectors 3x 4-pin SATA power supply 1x 4-pin power supply and switch |
1x 40-pin compatible with Raspberry Pi 1x 28-pin SAMD21G18 chip connector 3x 4-pin SATA power supply 1x 4-pin power supply and switch |
1x 40-pin compatible with Raspberry Pi 1x 28-pin SAMD21G18 chip connector 3x 4-pin SATA power supply 1x 4-pin power supply and switch |
|
| USB |
2x USB 2.0 Type A 1x USB 3.0 Type A 1x USb 3.1 Type C |
2x USB 2.0 Type A 1x USB 3.0 Type A 1x USb 3.1 Type C |
2x USB 2.0 Type A 1x USB 3.0 Type A 1x USb 3.1 Type C |
|
| Video |
HDMI 2.0a: up to 4096 x 2160 px / 60 Hz 24 bpp DP1.2A: up to 4096 x 2160 px / 60 Hz 24 bpp |
HDMI 2.0a: up to 4096 x 2160 px / 60 Hz 24 bpp DP1.2A: up to 4096 x 2160 px / 60 Hz 24 bpp |
HDMI 2.0a: up to 4096 x 2160 px / 60 Hz 24 bpp DP1.2A: up to 4096 x 2160 px / 60 Hz 24 bpp |
|
| Extension slots |
M.2 (Key B, 2242/2280): SATA III, USB 2.0 MicroSD SIM SATA III |
M.2 (Key B, 2242/2280): SATA III, USB 2.0 MicroSD SIM SATA III |
M.2 (Key B, 2242/2280): SATA III, USB 2.0 MicroSD SIM SATA III |
|
| RTC | JST 1.0 CR2032 3 V (supplied) | JST 1.0 CR2032 3 V (supplied) | JST 1.0 CR2032 3 V (supplied) | |
| TPM | Built-in TPM (2.0) | Built-in TPM (2.0) | Built-in TPM (2.0) | |
| Power supply | DC Jack 5.5 / 2.1 mm or USB type C PD DC Jack: 12 V to 19 V / 2 A USB type C: 12 V / 2 A |
DC Jack 5.5 / 2.1 mm or USB type C PD DC Jack: 12 V to 19 V / 2 A USB type C: 12 V / 2 A |
DC Jack 5.5 / 2.1 mm or USB type C PD DC Jack: 12 V to 19 V / 2 A USB type C: 12 V / 2 A |
|
The set includes
- Minicomputer Odyssey X86J4105800
- WiFI + Bluetooth antenna and 5 GHz WiFi antenna
- SATA adapter
- RTC
- 5.5 / 2.1 mm DC power supply
Useful links |
