- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description
The DFRobot module is equipped with the Atmega328P microcontroller compatible with Arduino Pro/Mini. This means that can be programmed throughthe Arduino IDEusing available libraries. To connect the system with the computer, you will need the USB - UART converter.
TheDFRobot module features Atmega328P microcontroller clocked at 8 MHz. It has 14 digital input/outputs, 6 PWM channels, 8 analog inputs, and communications interfaces. It features with small size and low current consumption - in sleep mode up to 0.12 µA.
|
In order to start µHex, you need to connect the system to the computer using a USB - UART converterand select inthe Arduino IDE, the Arduino Pro board. Detailed information is available inthe user's guide. |
Programming
Creating and installing software is allowed by the free environment of the Arduino IDE. This board has no system that controls the USB interface. Therefore, for programming necessary is UART<->USB adapter.
Specification
- Supply voltage: from 2.7 V to 5 V
- Leads work with voltages from 2.7 V to 5 V
- Current consumption in sleep mode:
- For the 3.3 V - 0.12 µA
- For 5.0 V - 0.16 µA
- Leads: on the edges of the board, 2.54 mm pitch (goldpin stripsold separately)
- Microcontroller: Atmega328
- Clock frequency: 8 MHz
- SRAM: 2 KB
- Flash memory: 32 KB (0.5 KB is reserved for bootloader)
- EEPROM: 1 KB
- I/O Ports: 14
- PWM outputs: 6 (pins with nr 3,5,9,10,11)
- Number of analog inputs: 8 (channels of A/C converter)
- Serial interfaces: UART, I2C
- External interrupt
- Dimensions: 28 x 31 x 2.3 mm
- Weight: 10 g
Useful links |
