- EOL
|
Attention! The sale of the product has been completed. Check otherdevices in this category. |
Description
Intel Edison boardsensor kit.The set includes sensors for light, temperature, motion, servo, display and much more. Connection of the modules is facilitated by a dedicated BaseShield cover with cables.
The set is delivered in a plastic box.
|
Intel provides aprogramming environmentandexamples of connectingthe modules to the IoT network. |
Included
| L.p. | Photo | Description |
|---|---|---|
| 1 |  |
Base Shield v2- a cap for Intel Galileo Gen 2 to connect sensors using the included cables. |
| 2 |  |
Buzzer module- simple sound generator. |
| 3 |  |
- board with tact switch button and pull-up resistor to ground. Communication is a 0/1 digital signal. |
| 4 |  |
Relay module- maximum supported voltage is 250 V AC and maximum current 15 A. For safety reasons, we recommend working with voltages up to 24 V. |
| 5 |  |
Light sensor module- the sensor measures the ambient light intensity. Based on the LM358. |
| 6 |  |
Module with temperature and humidity sensor- operates in the temperature range from 0 °C to 70 °C and humidity from 0 % to 80 % RH. |
| 7 |  |
Encoder module- 360° rotation angle encoder with button, can detect rotation in two directions. |
| 8 |  |
Module with soil moisture sensor- can determine the moisture level in the soil. |
| 9 |  |
PIR motion detector module- detects movement within a range of 6 m and an angle of up to 120°. |
| 10 | |
UV sensor module- can detect the level of ultraviolet radiation in the environment. |
| 11 |  |
Micro-servo servomotorwith a 180° movement range. Included in the set of pliers and mounting screws. |
| 12 |  |
RGB LCD display with backlighting- a screen with backlighting in full colour palette. Communicates with the microcontroller via the I2C interface. It has built-in English and Japanese fonts. |
| 13 |  |
9V battery clip with jack type output- allows you to power from the battery, its length is 12.6 cm. |
| 14 |  |
2 4-pin Grove cables- allow to connect modules with Base Shield v2 board - length 50 cm. |
| 15 |  |
USB cable - microUSBto connect the device to a computer, it is 100 cm long. |
| 16 | And a set of mounting screws and instructions for use. |
Useful links |
