- Reduced price
Product description: Filament Rosa3D ASA 1.75 mm 0.7 kg - Silver
ASA filament in silver , produced by Rosa3D . During printing, it shows a limited degree of shrinkage, the resulting vapors are less noticeable than when using traditional ABS. The main feature of ASA thermoplastic is its high resistance to UV radiation, heat and moisture. It can be used in outdoor conditions exposed to changing weather conditions. The filament diameter is 1.75 mm . The weight of the material on the spools is 0.7 kg. The spool on which the filament is wound is in two different versions sent randomly.
In our offer of filaments you will also find other materials and colors.
Filaments used in 3D printing .
Additional information about ASA
- ASA filament (acrylonitrile - styrene - acrylic) is a material with high resistance to UV radiation, moisture and heat. It can be used in an environment with changing weather conditions.
- ASA has lower shrinkage than popular ABS. It also gives off less annoying fumes during printing.
- The thermoplastic shows no signs of deformation up to a temperature of about 94 ° C.
- ASA material is often used in the automotive and marine industries. Elements made of this thermoplastic are, for example, mirror and sensor housings, covers, radiator covers.
- First layer adhesion can be improved by using a small amount of ASA dissolved in acetone.
- For this material, printing in a closed chamber is recommended.
It is recommended to print in a closed chamber.
The adhesion of the first layer to the table can be improved with ASY juice (ASA material dissolved in acetone).
Suggested filament printing parameters
| Head temperature | 220 ° C to 250 ° C |
| Table temperature | From 90 ° C to 110 ° C |
|
Due to the differences in the design of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally. |
Filament Rosa3D ASA 1.75 mm 0.7 kg - Silver.
Technical specification and physical properties of the filament
| Parameter | Range |
|---|---|
| Filament diameter | 1.75 mm |
| Filament dimensional tolerance | +/- 0.05 mm |
| Color | Silver |
| Printing temperature | 220 ° C to 250 ° C |
| Smell | palpable, not intense |
| Material | ASA |
| Spool diameter | 200 mm |
| Spool width | 55 mm |
| Mounting hole diameter | 52 mm |
| Desiccant | Yes |
| Vacuum packing | Yes |
| Material density | 1.07 g / cm 3 |
| Tensile strength at break | 40 MPa |
| Elongation at break | 35% |
| Modulus of elasticity | 1725 MPa |
| Net weight | 0.7 kg |
