Product description: Filament Rosa3D ASA 1.75 mm 0.7 kg - Gray
The gray filament of Rosa3D, wound on a spool, has a weight of 0.7 kg and a diameter of 1.75 mm . ASA is resistant to UV radiation, moisture and heat , which makes it an ideal material for outdoor applications. During printing , it emits less harmful substances than ABS plastic. The product is fully compatible with printers that are not equipped with locks that prevent the use of cartridges from third-party suppliers.
Filament Rosa3D ASA 1.75 mm 0.7 kg - Gray.
ASA is resistant to chemical agents and mechanical damage.
ASA filament properties
- High resistance to UV radiation, heat and moisture - the ability to expose printouts to external factors
- Resistant to chemical agents and mechanical damage
- Less problematic in printing than ABS plastic - there is less emission of toxic compounds
Suggested filament printing parameters
| printing temperature | from 220°C to 250°C |
| table temperature | from 90°C to 110°C |
| Print cooling | Recommended |
Due to the differences in the construction of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally.
Technical specification and physical properties of the Rosa3D filament
| PARAMETER | RANGE |
|---|---|
| Filament diameter | 1.75mm |
| Color | Gray |
| Material | ASA |
| head temperature | From 220°C to 250°C |
| table temperature | From 90°C to 110°C |
| net weight | 0.7 kg |
