Description: Filament Rosa3D ASA 1,75 mm 0,70 kg - Black.
FilamentASA in black, the manufacturer of which is Rosa3D. During printing shows a limited degree of shrinkage, the resulting fumes are less noticeable than when using traditional ABS. The main feature of ASA thermoplastic is high resistance to UV radiation, heat and moisture. It can be used in outdoor conditions exposed to changing weather conditions. The diameter of the filament is 1.75 mm. Weight of material wound on a spool is 0.70 kg.
In our offer of filaments you will also find other materials and colors.
Filaments used in 3D printing.
Additional information about ASA
- ASA (acrylonitrile - styrene - acrylic) filament is a plastic with high resistance to UV radiation, moisture and heat. It can be used in variable weather conditions.
- ASA has less shrinkage than the popular ABS. It also gives off less annoying fumes during printing
- The thermoplastic shows no signs of deformation up to a temperature of approx. 94°C
- ASA material is often used in the automotive and marine industries. Components made from this thermoplastic include mirror and sensor housings, covers and radiator caps
- Adhesion of the first layer can be improved with a small amount of ASA dissolved in acetone
- For this material printing in a closed chamber is recommended
| Printhead temperature | From 220°C to 250°C |
| Table temperature | From 90°C to 110°C |
|
Due to the differences in the construction of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally. |
Filament Rosa3D ASA 1,75 mm 0,70 kg - Black.
Technical specification of ASA felt
| Parameter | Range |
|---|---|
| Dimensional tolerance of the felt | +/- 0,05 mm |
| Dimensional tolerance of oval | +/- 0,02 mm |
| Density | 1,07 g/cm3 |
| Tensile strength (rupture) | 40 MPa (ASTM D638) |
| Modulus of elasticity | 1725 MPa (ASTM D638) |
| Izod impact strength (notched) | 40 kg x cm / cm (ASTM 256) |
| Vicat softening temperature | 94°C (ASTM D1525) |
| Odour | perceptible, not intensive |
| Material | polyethylene terephthalate with glycol |
| Spool diameter | 200 mm |
| Spool width | 55 mm |
| Mounting hole diameter | 52 mm |
| Vacuum packing | Yes |
| Moisture absorber | Yes |
| Product weight | 700 g net weight |
