List of products by brand Akso - Strona 39
Antimagnetic tweezers Vetus ESD11 - 142mm
Stainless steel antimagnetic tweezers. Symbol: HRC40 Vetus ESD-11. Length: 140 mm2-pin female socket housing 2,5mm - 5pcs.
2-pin female socket housing - 2.50 mm raster. In the set there are 5 pieces.WTA 5x20mm fuse - 250V/1A - 10pcs
Fuse, type 5 x 20 mm, operating with the voltage of up to 250 V which allows for the flow of the current of up to 1.0 A. The price is for 10 pieces.Eight-segment display x4 - 14mm red - common anode
Quadruple 8-segment display of four digits along with points and some letters.Switch ON-OFF momentary, round 250V/3A - red
Switch with a round attachment with the contact's loading capacity of 3 A for 250 V. Items are sold in sets of 10 pieces.Magnetic sensor - reed contact CMD1423 + screws
Wireless proximity sensor activated magnetically. Case dimensions - 14 x 23 mm.Slide switch SS12T44 2-position - 5pcs.
Slide switch, straight to print with dimensions 12.1 x 8.7 x 5.5 mm . Lead spacing 3.00 mm.Cables, measuring probes for multimeters - PM7
Cables on one end have angular banana connectors with shielded tips with a diameter of 4 mm, on the other end there are measuring probes with a length of 145 mm. Length of the...Lever switch On-On 250V/3A - 5pcs.
Switch with lever, two-state for printing with 3 contacts with the load of 3A 250V or 6A 125 . Pins pitch is 4.7 mm, total height is 31.0 mm. The set includes nut and...Helping hand - Holder with magnifying glass and stand for soldering iron ZD10G
Mounting handle with a magnifying glass, clips, a spring for a soldering iron and a spot for the tip cleaner.AC IEC male connector with latch - with switch
IEC male socket mounted to the housing with a latch. The socket has an I / O switch. For self-assembly.Electrolytic capacitor 1000uF/25V 10x17mm 105C THT - 5pcs
Through hole electrolytic capacitor of 1000 uF / 25 V. Pins' pitch: 5 mm. Size: Γ10 x 17 mm. Price is for 5 pieces.Active buzzer with generator FY248 23mm 3-18V
Piezoelectric transducer in a case with put out wires and mounting handles.Limit switch mini - WK607 - 5 pcs
A limit switch without a roller. Maximum operating parameters are 125 V and 5 A current.Stepper Motor JK28HS45-0674 200 steps 4,5V/0,67A/0,09Nm
Bipolar stepper motor , four-wire. Has a resolution of 200 steps per revolution (1.8 degrees). It is powered by 4.5 V, draws 670 mA per coil. Torque is 0.95 kg*cm (0.09 Nm)....Pixel chain - 50x LED 5mm green
50 bright LEDs in green color united in one chain. Each pixel has a diameter of 5 mm, protected by a silicone case, IP65.Laminate FR4 one-sided size XL
FR4 laminate on one side with a thickness of about 1.6 mm. Copper layer 35 um. The sheet dimensions are 170 x 250 mm, with a tolerance of 20 mm.Magnetic self-adhesive tape - 25mm, 10m
Self-adhesive magnetic tape . The non-magnetic side has a self-adhesive layer; therefore it can be stuck to almost any surface including paper, plastics, degreased aluminium...Self-adhesive membrane keypad - 1 "SOS" key
Membrane keyboard has one button labeled "SOS". On its back is the tape to facilitate mounting.Radiator RAD70 19x13x9mm TO220 - 5pcs.
Heat sink with the size of 19 x 13 x 9 mm for the cases from the series TO220.Stepper Motor JK20HS30-0604A 200 steps 3,9V/0,6A/0,02Nm
Bipolar stepper motor, four wire. It has a resolution of 200 steps per revolution (1.8 degrees). It is powered by 3.9 V and draws 600 mA per coil. The torque is 0.18 kg*cm...