Product description: Fiberlogy MattFlex 40D 1.75 mm 0.85 kg filament - with reusable spool - Graphite
The MattFlex 40D graphite filament produced by Fiberlogy is made of a flexible material, and the models printed with it are rubber -like. Among other types of filaments , it is distinguished by a matte finish . It is designed for 3D printing in FFF / FDM technology with a maximum speed of 60 mm / s . MattFlex 40D makes it easy to hide the layers, giving the print a smooth surface without the need for any processing. The diameter of the filament is 1.75 mm , and the weight of the material wound on the spool is 0.85 kg .
Fiberlogy MattFlex 40D 1.75 mm 0.85 kg filament - with reusable spool - Graphite.
In our offer of filaments you will also find other materials and colors.
Properties of MattFlex 40D material
- Matte finish and low visibility of layer boundaries in printed models
- Shore 40D hardness
- Very good thermal and chemical resistance
- Abrasion resistance
- Waterproof
- Print speed up to 60 mm / s
Suggested filament printing parameters
| Printing temperature | From 210 ° C to 230 ° C |
| Table temperature | 50 ° C to 70 ° C |
| Cooling the print | Recommended |
Due to the differences in the design of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally.
Technical specification and physical properties of the filament
| PARAMETER | RANGE |
|---|---|
| Filament diameter | 1.75 mm |
| Filament dimensional tolerance | +/- 0.05 mm |
| Color | Graphite |
| Printing temperature | From 210 ° C to 230 ° C |
| Table temperature | 50 ° C to 70 ° C |
| Material | MattFlex 40D |
| Airflow | 50% to 75% |
| Flowrate | 105% to 110% |
| Print speed | Up to a maximum of 60 mm / s |
| Desiccant | Yes |
| Vacuum packing | Yes |
| Roundness | +/- 0.01 mm |
| Subsoil | Glass, masking tape |
| Direct retraction | From 1 to 2 mm |
| Bowden Retraction | From 4 to 6 mm |
| Retraction speed | From 10 to 30 mm / s |
| Net weight | 0.85 kg |
