- New
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Sale
- Sale
List of products by brand Akso - Strona 3
Loading...
Rotary switch 8-position 1 circuit - 37mm
Rotary switch, eight-state for the case, equipped with 9 contacts. The total height is 37 mm.
Index: UCC-06150
Index: UCC-06150
LED indicator 230V AC - 28mm - red
LED light, operating voltage 230 V AC. It has a diameter of 28mm.
Index: LED-09015
Index: LED-09015
Stepper Motor 42HM48-0806 400 steps 6,0V / 0,8A / 0,31Nm
Unipolar stepper motor, six wire. It has a resolution of 400 steps per revolution (0.9 degrees) . It is powered by 6 V and draws 0.8 mA current per coil. The torque is 3.17...
Index: AKS-11618
Index: AKS-11618
NTC 110 10kΩ thermistor with M6 screw connection
Thermistor of NTC type with a resistance of 10 kΩ with connector for M6 screw. The connecting cable has a length of 160 mm.
Index: SES-03878
Index: SES-03878
Diode Schottky LL48 SMD 0,35A / 40V - 10pcs
Schottky diodes with a maximum current of 350 mA, reverse 40 V.
Index: AKS-14583
Index: AKS-14583
Barrier strip for PCBs, 3-pin, 8.5mm raster
Barrier strap for PCB, 3-pin, with a pitch of 8.5 mm, the maximum voltage for the contacts is 300 V and current is 20 A.
Index: AKS-10955
Index: AKS-10955
Adapter PCB - QFP32/SOP32 to DIP32
Adapter for connecting circuits in QFP/SOP cases to DIP outputs. It also allows you to connect circuits in a breadboard or connect with wires.
Index: AKS-12682
Index: AKS-12682
Plastic foot NS40 40x10mm - 4pcs
Round feet made of plastic used as a stand for various types of objects. The diameter of the leg is 40 mm and its height is 10 mm. It has a foam padding so it does not scratch...
Index: KAB-07500
Index: KAB-07500
THT RWA Resistor 10W 0,33 Ohm - 10pcs
A precise resistor with high stability of the RWA type with a capacity of 10 W and a resistance of 0.33 Ω. The price includes 10 pieces.
Index: PAS-04567
Index: PAS-04567
Electric lock powered with the voltage of 12 V. It is used for example in electronically controlled system of closing doors, gates, furnitures, etc.
Index: MOD-08356
Index: MOD-08356
Limit switch with folding roller - WK828
Limit switch with lever ended with roller. Maximum operating parameters: voltage of 250 V and current of 16 A.
Index: AKS-11239
Index: AKS-11239
SMA female connector for printing, right angle reverse - 50Ω
The SMA female reverse angled connector with an impedance of 50 Ω, it is installed in the PCB. It is used to connect antennas and receivers.
Index: KAB-06321
Index: KAB-06321
LED indicator 230V AC - 28mm - red with a buzzer
LED light, operating voltage 230 V AC. It has a diameter of 28 mm.
Index: LED-09017
Index: LED-09017
Double-sided tape for LCD 3mm x 50m
Double-sided tape to protect screens and touch panels, e.g. during repair. It is very thin and has an adhesive layer. It is also used in the service of laptops, tablets, etc....
Index: MOD-05550
Index: MOD-05550
ON-OFF switch monostable - PBW-12BPW - 2A / 250V - red
A salient, monostable switch with the red backlight. Contact load is 2 A for 250 V.
Index: AKS-10806
Index: AKS-10806
Stepper Motor 42HM48-0406 400 steps 12V / 0,4A / 0,31Nm
Unipolar stepper motor, six wire. It has a resolution of 400 steps per revolution (0.9 degrees) . It is powered by 12 V and draws 400 mA current per coil. The torque is 3.17...
Index: AKS-11617
Index: AKS-11617
Socket 1x3pin - 2,54mm - long - 10pcs.
3-pin connector, easy to solder onto the PCB. It is used, for example, for connecting the male wires. Pitch is equal to 2.54 mm. It features long pins with a length of 10.5 mm.
Index: UCC-08507
Index: UCC-08507
High temperatura probe PT100 - 7x50mm
Waterproof analogue sensor with the high temperature working in the range from -200 °C to 420 °C. The output is resistance dependent on temperature. Probe length is 50 mm.
Index: SES-07468
Index: SES-07468
Diode Schottky MBR10100 CT 10A / 100V
The MBR10100 dual-anode Schottky diode features a single common cathode and two common anodes. Designed for applications requiring fast switching and low forward voltage drop....
Index: AKS-14584
Index: AKS-14584
Surface mountable battery holder for one CR2032 3 V type battery.
Index: BAT-06379
Index: BAT-06379
ON-OFF bistable switch - PBW-16APP - 2A 250V - flat red
Bistable pushbutton, flat with red lighting. Load capacity of contacts up to 2 A for 250 V .
Index: AKS-10811
Index: AKS-10811
Kanthal A1 resistance wire 0.20mm 44,7Ω/m - 9,1m
Kanthal type resistance wire made of an alloy of iron, chromium and copper. It has a length of 9, 1 m and a diameter of 0,20 mm. Its resistance is 44.7 Ω / m. The wire is...
Index: AKS-16661
Index: AKS-16661
Ribbon cable 20 gray IDC, raster 1.27mm - roll 30.5m
IDC 20 core ribbon cable. Raster: 1.27 mm. Roll: 30,5 m .
Index: AKS-10951
Index: AKS-10951
Portable LED tester is equipped a connector that allows you to test any LED current range from 1 to 150 mA. The device is powered by battery 9V.
Index: MOD-04745
Index: MOD-04745