List of products by brand Akso - Strona 2
High temperatura probe PT1000 - 1kΩ 6x50mm metal braid
Waterproof analog high temperature sensor operating from -30 °C to 500 °C. The output is a temperature dependent resistance. The length of the probe is 50 mm.GSM antenna 18x22mm - self-adhesive - 15cm
Antenna operating in the GSM band, it has U. FL connector. It operates at frequencies from 800 MHz to 1900 MHz. It has a layer of self-adhesive tape. Dimensions: 18 x 22 mm....Safety switch ON-OFF mushroom - 23mm
The "mushroom" safety switch with a loading capacity of contacts: 5 A for 250 V.High temperatura probe PT1000 - 6x50mm
Waterproof analogue sensor with the high temperature working in the range from -30 °C to 500 °C. The output is resistance dependent on temperature. Probe length is 50 mm.High temperatura probe PT100 - 3x30mm with wires
Analog sensor of high temperature operating in the range from -200 °C to 450 °C. The output is the resistance depending on temperature. The probe's length is 30 mm.LED indicator 230V AC - 12mm - green
LED light, operating voltage 230 V AC. It has a diameter of 12 mm.Thermometer with external probe and LCD display from -50°C to 80°C - white
Digital sensor with the probe for measuring the outdoor temperature and with the LCD display. It works in the range from - 50 °C to 80 °C. The probe is on a wire with a length...Solenoid Valve 12V - 1/2'' 0,02-0,8MPa - 11mm spigot
The device allows you to control the flow of liquids using a computer or microcontroller. The valve is powered with 12 V . Stub: 11 mm.LED indicator 230V AC - 19mm - red with a buzzer
LED light, operating voltage 230 V AC. It has a diameter of 19 mm.Linear voltage regulator LDO 3,3V LD1117A - THT TO220 - 5 pcs
Low-Dropout linear stabilizer. Output voltage: 3,3 V. Maximum output current: 0.95 A. TO220 housing. Sold for 5 pieces.Stepper motor JK42HS60-1704A 200 steps 5V/1.7A/0.66Nm
Bipolar stepper motor, four wire. It has a resolution of 200 steps per revolution (1.8 degrees) . It is powered by 5.0 V and draws 1700 mA per coil. The torque is 6.8 kg*cm...Rotary switch 6-position 1 circuit - 30mm
Rotary switch, 6-state for the case, equipped with 9 contacts. The total height is 29.5 mm.LED indicator 24V DC - 28mm - red with a buzzer
Indicator light operating at 24 V DC. It has a diameter of 28 mm.LED indicator 230V AC - 8mm - yellow
LED light, operating voltage 230 V AC. It has a diameter of 8 mm.LED strip driver - Mini - 11 keys
The module allows you to control the brightness of a single-color LED strip. It is equipped with a DC 5.5 / 2.1 mm power connector and a remote control.Barrier strip for PCBs, 4-pin, 8.5mm raster - 5pcs.
Barrier strip for PCB, 4-pin with 8,5 mm pitch, maximum voltage for contacts is 300 V and current is 20 A.Literal markers for cable 5mm - 1300pcs
Set for marking wires with a diameter of 5 mm. Contains 50 pieces of markers with letters from A to Z in orange.LED indicator 12V DC - 12mm - blue
LED light, working voltage 12 V DC. It has a diameter of 12 mm.Rotary switch 3-position 4 circuits - 60mm
Rotary switch, 3-state for the case, equipped with 16 contacts. The total height is 60 mm.
