- Reduced price
- Sale
- Sale
- Sale
List of products by brand Akso - Strona 4
Loading...
Plastic foot NS40 40x10mm - 4pcs
Round feet made of plastic used as a stand for various types of objects. The diameter of the leg is 40 mm and its height is 10 mm. It has a foam padding so it does not scratch...
Index: KAB-07500
Index: KAB-07500
THT RWA Resistor 10W 0,33 Ohm - 10pcs
A precise resistor with high stability of the RWA type with a capacity of 10 W and a resistance of 0.33 Ω. The price includes 10 pieces.
Index: PAS-04567
Index: PAS-04567
SMA female connector for printing, right angle reverse - 50Ω
The SMA female reverse angled connector with an impedance of 50 Ω, it is installed in the PCB. It is used to connect antennas and receivers.
Index: KAB-06321
Index: KAB-06321
High temperatura probe PT100 - 7x50mm
Waterproof analogue sensor with the high temperature working in the range from -200 °C to 420 °C. The output is resistance dependent on temperature. Probe length is 50 mm.
Index: SES-07468
Index: SES-07468
Diode Schottky MBR10100 10A / 100V
Schottky diode with a maximum current of 10 A and a reverse voltage of 60 V.
Index: AKS-14584
Index: AKS-14584
Socket 1x3pin - 2,54mm - long - 10pcs.
3-pin connector, easy to solder onto the PCB. It is used, for example, for connecting the male wires. Pitch is equal to 2.54 mm. It features long pins with a length of 10.5 mm.
Index: UCC-08507
Index: UCC-08507
ON-OFF switch monostable - PBW-16BPD - 2A 250V - flat green point
Monostable flat switch with the green point backlight. Contact load is 2 A for 250 V.
Index: AKS-10817
Index: AKS-10817
ON-OFF bistable switch - PBW-16APS - 2A 250V - flat red round
Flat bistable button with red illumination in the form of the ring. Contact load is up to 2 A for 250 V.
Index: AKS-10813
Index: AKS-10813
Portable LED tester is equipped a connector that allows you to test any LED current range from 1 to 150 mA. The device is powered by battery 9V.
Index: MOD-04745
Index: MOD-04745
Surface mountable battery holder for one CR2032 3 V type battery.
Index: BAT-06379
Index: BAT-06379
ON-OFF bistable switch - PBW-16APP - 2A 250V - flat red
Bistable pushbutton, flat with red lighting. Load capacity of contacts up to 2 A for 250 V .
Index: AKS-10811
Index: AKS-10811
Kanthal A1 resistance wire 0,51mm 6Ω/m - 9,1m
Made of an alloy of iron, chromium and aluminium, Kanthal A1 type resistance wire 9.1 m long. It has a diameter of 0.51 mm and its resistance value is 6 Ω / m. AWG of the...
Index: AKS-16667
Index: AKS-16667
USB plug, type B for soldering the cable in a metal case.
Index: KAB-00506
Index: KAB-00506
Kanthal A1 resistance wire 0.20mm 44,7Ω/m - 9,1m
Kanthal type resistance wire made of an alloy of iron, chromium and copper. It has a length of 9, 1 m and a diameter of 0,20 mm. Its resistance is 44.7 Ω / m. The wire is...
Index: AKS-16661
Index: AKS-16661
Magnetic self-adhesive tape - 10mm, 10m long
Self-adhesive magnetic tape . The non-magnetic side has a self-adhesive layer; therefore it can be stuck to almost any surface including paper, plastics, degreased aluminium...
Index: NSZ-09805
Index: NSZ-09805
ON-OFF switch monostable - PBW-12BPW - 2A / 250V - flat green
A flat, monostable switch with the green backlight. Contact load is 2 A for 250 V.
Index: AKS-10805
Index: AKS-10805
Monostable array switch - PT-29R - 10A 440V NC 0
Monostable NC panel switch, contact load 10 A for 600 V. Key marking "0".
Index: NSZ-09803
Index: NSZ-09803
26-pin (2 x 13) straight plug for printing (pitch: 2.54 mm). Price is for 5 pieces.
Index: KAB-01571
Index: KAB-01571
D-SUB 9 male plug is used, for example, for the communication via the RS232 protocol.
Index: KAB-02454
Index: KAB-02454
Angled D-SUB 25 - female socket
D-SUB DE-15F female socket for the cable is used, for example, as the connector of the parallel LPT port.
Index: KAB-04997
Index: KAB-04997
Stepper Motor 42HM48-1206 400 steps 4,0V / 1,2A / 0,31Nm
Unipolar stepper motor, six wire. It has a resolution of 400 steps per revolution (0.9 degrees) . It is powered by 4.0 V and draws 1200 mA per coil. The torque is 3.17 kg*cm...
Index: AKS-11619
Index: AKS-11619
Fuse holder 6x30mm GBZ30 - 5pcs.
The socket is designed for mounting a 6 x 30 mm fuse.
Index: KAB-05474
Index: KAB-05474
XT60 type socket. The connector is used, among others for connections with li-pol packages. The cable length is 10 cm.
Index: KAB-07517
Index: KAB-07517
Kanthal A1 resistance wire 0,64mm 4,9Ω/m - 9,1m
Kanthal A1 is a type of resistance wire made of an alloy of iron, chromium and aluminium. The wire is 9.1 m long and has a diameter of 0.64 mm. Its resistance value is 4.9 Ω...
Index: AKS-16669
Index: AKS-16669