- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: 3D Printer - Flashforge Creator 3 Pro - IDEX dual-extruder
3D printer with IDEX system, which is based on the use of two independent extruders. It allows you to form two 3D models at the same time in one of three available modes: duplicate, mirror and two-color printing. The dual extruder is also great for creating dissolvable supports. The working area of the device is 300 x 250 x 200 mm. Flashforge Creator 3 Pro has an enclosed housing. The overall dimensions of the printer are: 627 x 485 x 615 mm.
Setting up the dual extruder and filament can be done in the manufacturer's software FlashPrint5.
3D Printer - Flashforge Creator 3 Pro.
Fast nozzle warm-up and efficient cooling of 3D prints.
Advanced extruders
Flashforge Creator 3 Pro features powerful, self-contained extruders. The dual fan design provides efficient cooling of 3D prints. It takes just 1 minute to warm up the nozzle to an operating temperature of 200°C.
New nozzle design and improved leveling sensor
On the Creator 3 Pro, the nozzle and heating block are mounted together. This makes it easier to replace and maintain these printer components. The improved sensor used in the machine ensures a more accurate leveling of the work table.
Nozzle and sensor for easier leveling of the heating table.
Three print modes in Creator 3 Pro.
Three printing modes
Flashforge Creator 3 Pro, thanks to its two independent IDEX extruders, allows you to print 3D models in three modes:
- Duplicate
- Mirror print
- Standard two-color printing
Two extruders running at the same time are also great for printing with supports, especially soluble ones.
Possibility to use different types of nozzles
The Creator 3 Pro can use high temperature nozzles (the maximum working temperature of this component is 320°C). The printer is compatible with stainless steel and carbon steel nozzles (recommended to work with carbon fiber filaments) with bore diameter: 0.4 mm, 0.6 mm, 0.8 mm. Nozzles are not included in the set.
Types of nozzles compatible with the printer. Not included.
Hotbed reaches a maximum operating temperature of 110°C in just 3 minutes.
Large workspace
Flashforge Creator 3 Pro offers a large working area of: 300 x 250 x 200 mm. The maximum working temperature of the hotbed is 120°C, which only takes about 3 minutes to reach. On the surface of the hotbed there is a flexible overlay, which ensures good heat conduction during printing and easy removal of the models afterwards.
Accessories included
- Spool of PLA filament - 2 pcs.
- Power cord - 1 pc.
- Spatula for tearing off printouts - 1 pc.
- USB flash drive - 1 pc.
- PTFE tube - 1 pc.
- Pin to unlock the nozzle - 1 pc.
- Open end wrench - 1 pc.
- Screwdriver - 1 pc.
- Allen wrench - 1 pc.
- Grease packet - 1 pc.
- Glue stick - 1 pc.
Specification of 3D Printer - Flashforge Creator 3 Pro
| Technical specification | |
|---|---|
| Supply voltage: | 200 V to 240 V (AC - mains) |
| Operating voltage: | 24 V (DC) / 20.85 A |
| Power: | 650 W |
| Nozzle diameter: | standard: 0.4 mm (optional: 0.6 / 0.8 mm) |
| Supported filament: | PLA, ABS, PVA, PETG, HIPS, PA, PC, ASA,PACF |
| Filament diameter: | 1.75 mm |
| Print thickness: | 0.05 mm to 0.4 mm |
| Printing accuracy: | 0.2 mm |
| Display: | 4.3'' touchscreen |
| Operation mode: | USB, WiFi, Ethernet, FlashCloud |
| Input file format: | 3mf, stl, obj, fpp, bmp, png, jpg, jpeg |
| Output file format: | gx/g |
| Compatible Operating Systems: | Windows 7/8/10, Mac OS, Linux |
| Built-in camera: | yes |
| Volume during operation: | 55 to 60 dB |
| Print size: | 300 x 250 x 200 mm |
| Nozzle temperature: | 320°C |
| Table temperature: | 120°C |
| Spool holder diameter: | 53 mm |
| Printer dimensions: | 627 x 485 x 615 mm |
| Weight: | 40 kg |
Useful links |
