- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: 3D printer - Flashforge Creator 3
Professional 3D printer manufactured by Flashforge. The device has a workspace of 300 x 250 x 200 mm. The Creator 3 model is distinguished by two independent extruders, which allow simultaneous printing of two types of filaments, and the creation of complex models using dissolvable supports. The printer also has an internal camera, which allows you to track the progress of work and an advanced auto-calibration system. The kit consists of partially assembled elements, so the assembly takes several minutes.
Flashforge Creator 3 model presentation.
Simultaneous printing of two identical elements.
Two independent extruders
The use of two independent extruders, allows to print demanding projects in less time. The mirror and copy functions allow you to create two identical models at the same time, making the Creator 3 even more efficient.
Dual extruders are also used to print the most complex models with irregular shapes, thanks to the possibility to create dissolvable supports.
Nozzles on the Creator 3.
Example models made with two types of filament.
The maximum working temperature of nozzles in the Creator 3 is up to 300°C. This value allows you to use most of the available types of felt for printing. The manufacturer lists among them PLA, ABS, PVA, PETG, HIPS, PA, PC, WOOD, ASA.
Advanced Z-axis auto-calibration mechanism
The Flashforge Creator 3 features an advanced Z-axis calibration system. This process is fully automated, simply by selecting the appropriate option in the printer menu. The software automatically stores the position data for both extruders as read by the sensor.
Automatic Z-axis calibration system.
Flashforge Creator 3 printing table.
Spring steel printing platform
The Creator 3 uses an innovative design for a high quality printing platform made of spring steel. Its maximum operating temperature is 120°C. As the printer is designed to create models with maximum dimensions of 300 x 250 x 200 mm, the manufacturer has taken care of comfortable detachment of such large elements from the table. Apart from removing them with traditional tools, it is possible to remove the top overlay from the table and detach the printout from it without the risk of damaging it.
Online preview thanks to built-in camera
A camera located in a closed working chamber allows continuous monitoring of each stage of print creation. This solution facilitates remote work control, without the need to be in the same room as the device. For proper operation of this feature, Wi-Fi access and a Cloud account are required, which in addition to viewing the image capture, allows you to pause or cancel printing.
Built-in camera.
Touch menu located in the 4.5'' display.
Touch Menu
The printer has a touch-sensitive menu located on the front panel with a 4.5'' display. Menu layout is clear and does not cause problems even for less experienced users.
Filament spools in the casing walls
Flashforge Creator 3 allows you to place the filament spools in the side walls of the chassis. This is a convenient solution to save space on your desk. Furthermore, the filament is additionally protected during printing. The illustration below shows the optimal dimensions of the spools that fit in the walls.
Dimensions of the spools that fit in the casing.
Presentation of the basic functions of the printer's dedicated software.
Additional features
-
Special brush installed in the chamber, which allows to keep nozzles clean
- Filament sensor
- Air filter
- Dedicated slicer software
Creator 3 specification
| Technical Specification | |
|---|---|
| Printing Method: |
FDM/FFF |
| Supply voltage: |
100 V to 240 V (AC - mains) |
| Operating voltage: |
24 V / 20.8 A |
| Total power: | 500 W |
| Number of extruders: | 2 independent |
| Printing speed: | 10 mm/s to 150 mm/s |
| Printing accuracy: | ± 0.2 mm |
| Print thickness: | 0.05 mm to 0.4 mm |
| XY axis positioning accuracy: |
0.011 mm |
| Z axis positioning accuracy: |
0.0025 mm |
| Nozzle diameter: |
standard: 0.4 mm, |
| Supported filament: |
PLA, ABS, TPU, PVA, HIPS, PETG, PLA, Wood (WPC), Nylon, etc. |
| Filament diameter: | 1.75mm |
| Operation mode: | Wi-Fi or USB reader |
| Input file format: | STL, OBJ, 3MF, FPP, BMP, PNG, JPG, JPEG |
| Output file format: | GX/G |
| Display: | 4.5'' touchscreen |
| Software: | FlashPrint |
| Supported operating systems: | Windows 7 / 8 / 10, Mac Os, Linux |
| Print size: |
300 x 250 x 200 mm |
| Nozzle temperature: | 300 °C max. |
| Work table temperature: | 120 °C |
| Printer dimensions: | 627 x 485 x 615 mm |
| Sound intensity during operation: |
55 to 60 dB |
| Weight: |
42 kg |
Examples of combinations of filaments on individual extruders.
Kit includes
- Flashforge Creator 3 printer
- Power cord for the device
- PLA filament - 2 reels
- Container for residue after printing - 2 pcs.
- Brushes to clean the nozzles - 2 pcs.
- USB flash drive
- Mounting accessories
- User Manual
Expert review of the 3D Printer - Flashforge Creator 3
The 3D printer Flashforge Creator 3 is a high-end tool that is able to print 3D models with a very high degree of precision. I recommend this equipment especially to individuals or companies who care about the highest quality and ease of use. Flashforge Creator 3 has an excellent reputation among users, primarily due to the highest quality and thoughtful solutions that facilitate the work with the equipment. Noteworthy is the system of two independent extruders, thanks to which the printer is able to simultaneously create a model from a durable material and supports from water-soluble material. Flashforge 3D printer is enclosed in a sealed chamber, allowing for prints with a maximum size of 300 mm x 250 mm x 200 mm, an internal camera to view the progress of work and an auto-calibration system.
Useful links |
