Description: Laboratory power supply UTP3313TFL-II
TheUTP3313TFL-IIlaboratory power supply unitfrom UNIT-Thasa stepless voltage regulation from 0 V to 30 V and acurrentregulation from 0 A to 3 A. It has oneoutput of adjustable DC voltage. It is equipped with two seven-segment LED displays, which glow in red (voltage) and green (current). The device is universally applicable both in amateur and laboratory electronics.
Panel description
One. On/Off button.
2. current stabilization mode indicator.
3) Voltage stabilization mode indicator.
4) Voltage display.
5. current display.
6 Voltage jumper adjustment.
7. smooth voltage adjustment.
8. current stroke adjustment.
9. liquid current adjustment.
Minus terminal: 0 V to 30 V (black).
11. earthing terminal: connected to the housing and earthing (green).
12. plus terminal: 0 to 30 volts (red).
UNIT-T UTP3313TFL-II laboratory power supply unit.
Technical specifications of the UTP3313TFL-II power supply unit
- Output voltage range: 0 V to 30 V
- Output current range: 0 A to 3 A
- Operating parameters:
- Voltage: AC 110 V / 220 V ± 5% 50/60 Hz
- Operating temperature: 0°C to 40°C, relative humidity: ≤ 85% RH
- Storage conditions: -10°C to 80°C, humidity ≤ 80% RH
- Output power: 96 W
- Load adjustment:
- Voltage: < 0.01% + 3 mV
- Intensity: < 0.1% + 5 mA
- Linear adjustment:
- Voltage: < 0.01% + 3 mV
- Intensity: < 0.1% + 5 mA
- Resolution setting (25°C ± 5°C):
- Voltage: 10 mV
- The intensity: 1 mA
- Resolution setting (20 Hz - 20 MHz):
- Voltage: < 0.5% + 20 mV
- The intensity: < 0.5% + 5 mA
- The pulses and noises:
- Tension: ≤ 1 mVrms
- The intensity: ≤ 3 mArms
- The temperature coefficient:
- Voltage: ≤ 300 ppm/°C
- Voltage: ≤ 300 ppm/°C
- Response time: < 100 uS (50% load, minimum intensity 0.5 A)
- Display: 4-digit
- Power supply:
- AC voltage 110/220 V ± 5%
- Frequency: 50 Hz/60 Hz
- Dimensions: 105 x 165 x 249 mm
- Weight: 3 kg
Set contents
- Laboratory power supply UTP3313TFL-II
- Power supply cable
- Crocodile wire - banana
