Product description: PiCowbell Adalogger - PCF8523 - data logging module - microSD, RTC - for Raspberry Pi Pico - STEMMA QT / Qwiic - Adafruit 5703
A module with a built-in PCF8523 chip for logging data and event logs that may be needed to analyze the system's operation. PiCowbell Adalogger works with Raspberry Pi Pico and Raspberry Pi Pico W , has a microSD memory card slot, STEMMA QT / Qwiic connector, as well as a built-in RTC and a CR1220 battery socket.
Also check the manufacturer's user guide !
PiCowbell Adalogger - PCF8523 - data logging module - microSD, RTC - for Raspberry Pi Pico - STEMMA QT / Qwiic - Adafruit 5703.
PiCowbell Adalogger by Adafruit.
Special features of the module
- Angled JST SH connector . It is divided into 3 lines, which correspond respectively as: power supply - 3 V, system ground - GND, data line of the I2C bus - IO4 (SDA) and clock line of the I2C bus - IO5 (SCL).
- MicroSD memory card slot . Connected to SPI pins 16, 18, 19 and card selection on pin 17. An optional card sense line can be connected to pin 15.
- PCF8523 chip . It is responsible for the RTC real-time clock powered by a CR1220 coin cell battery , which then enables data recording with accurate timestamps. It uses the I2C bus.
- Reset button . One press is all it takes to restart the program.
- Solder pads in the form of gold-plated pads significantly facilitate soldering. In addition, some of the leads are doubled, which increases the design possibilities
Technical Specifications
- Module type: data logging module
- Built-in chip: PCF8523
- Purpose: for Raspberry Pi Pico and Raspberry Pi Pico W
- Module dimensions: 52 x 20.3 x 6 mm
- Weight: 4.6g
Kit Contents
- PiCowbell Adalogger - PCF8523 - data logging module - 1 piece
- Goldpin strip 1x20 pin - raster 2.54 mm - 2 pieces
Components included in the set.
