





Powerful micro servo which type of media company Hitec with a supply voltage between 4.8 V to 6 V and the range of motion from 0° to 170°. Torque servo is 3.0 kg*cm, and its speed is 0.09 sec/60°.
Powerful micro servo which type of media company Hitec with a supply voltage between 4.8 V to 6 V and the range of motion from 0° to 170°. Torque servo is 3.0 kg*cm, and its speed is 0,09 sec/60°.
Servo is prostopadłościanie size 30 x 12x 30 mm. The following figure shows the exact dimensions in inches.
In our offer we also have wire and drivers, service.
Length | 30 mm |
Width | 12 mm |
Height | 30 mm |
Voltage to | 4.8 |
Voltage from | 6.0 V |
Torque | 3,0 kg*cm |
Mass | 17 g |
Servo - Range | 170 ° |
Servo - Size | medium |
Servo - Speed | 0,09 s/60° |
Servo - Type | analog |
Posting the payment for the order on our account on a business day up to 10 AM means sending the goods on the same day!
The time of payment depends on the ELIXIR's hours session of the sender's bank and the recipient of the transfer. It may take up to 2-4 working days.
Only for prepaid orders shipped to Poland.
Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Slovakia
Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, San Marino, Slovenia, The United Kingdom
Finland, Greece, Ireland, Liechtenstein, Serbia, Spain, Switzerland, Sweden
No customer reviews for the moment.
Micro Maestro USB 6-channel servo driver - Pololu 1350
6-channel servo controller with support for digital and analog signals. The user has at his or her disposal, the control of the servos through: the PC app (USB), serial...Mini Maestro USB 12-channel servo driver - Pololu 1352
12-channel servo controller with digital and analog signals. The user can control the servers via: PC (USB) application, serial interface and simple scripting language.Micro Maestro USB 24-channel servo driver - Pololu 1356
24-channel servo controller with digital and analog signals. The user can control the servers via: PC (USB) application, serial interface and simple scripting language.Micro Maestro USB 18-channel servo driver - Pololu 1354
18-channel servo controller with digital and analog signals. The user can control the servers via: PC (USB) application, serial interface and simple scripting language.Arduino Uno Rev3 - module A000066
The original module from the Arduino Uno with the AVR microcontroller ATmega328 in an interchangeable housing. It has 32 KB Flash memory, 2 KB RAM, 14 digital I/o of which 6...Customers who bought this product also bought:
Pololu LPR550AL 2-axis XY gyroscope
A sensor for measuring angular speed in two axes: XY. It has a choice of measuring range: to ±500 °/sec, ±2000 °/sec. It has an integrated voltage regulator and analogue...ACS709 current sensor -75A do +75A - Pololu 2199
Current sensor working in the range of +/- 75 A, based on the Hall effect. The output is an analog voltage. Supply voltage is from 3 V to 5.5 V.Pololu ACS711 current sensor -25A to + 25A
Current sensor operating in the +/-25 A range based on the Hall effect. The output is analogue voltage. Supply voltage from 3.0V to 5.5V. The product has been replaced by a new...Servo TowerPro SG-5010 - standard
Servo of standard type, double bearing. Speed: 0.16 s /60 ° . Torque: 6.5 kg. Dimensions: 40 x 20 x 41 mm. Weight: 48 g.AVR microcontroller - ATmega16A-AU SMD
Popular AVR microcontroller from ATmel in a case soldered on surface (SMD).MultiTool AVR, LPC - USB programmer
AVR processor programmer (compatible with STK500v2), NXP LPC (8051, ARM7, Cortex). RS232 USB adapter. 4 channel voltmeter. The device has universal digital outputs.Ceramic condenser 100nF / 50V THT - 10 pcs.
Through hole ceramic capacitor of 100 NF / 50 V. The price for 10 pieces.Quartz resonator 16MHz - HC49 - low
The quartz resonator in the small through hole case.Set of resistors SMD 0603 - 800pcs.
A set of 16 resistor values with a tolerance of 5 %, 50 pieces of each. The items in the SMD0603 case.RandomCategoryProducts
RX30 10V / 2200 µf with servo cable
Electrolytic capacitor 2200 UF / 10 V for filtering control signal of the servo. It has a 3 pin servo plug pluged into the driver. Size: Ø10 mm × 25 mmFeetech FK-US-003 Servo Mount - silver
Aluminum handle enables creating platforms controlled by servos. Dimensions: 64.5 x 56 x 25 mm. Weight: 21 g.Servo PowerHD HD-1201MG - standard
Strong standard servo with metal gears. Supply voltage: 4,8 V - 6,0 V. Speed: 0.14 sec /60 °. Torque: 13.2 lb (6 Volts). Dimensions: 40,7 x 20,5 x 39,5 mm. Weight: 60...Aluminum Servo Mount Feetech FK-FP-001
Aluminum plate is used as a foot of a robot, connecting with a side mount of a servo. Dimensions: 105 x 60 x 2 mm. Weight: 25g.Servo Hitec HS-785HB - continuous 360-degree work
Effective servo made by company Hitec, has karbonite gears with increased strength. Speed: 1.38 sec/60°. Torque: 13.2 kg*cm. Dimensions: 59 x 29 x 50 mm. Weight: 110 g.Micro Gripper Kit - gripper with micro servo - Pololu 3551
A kit for making a mini gripper with a maximum distance of 32 mm. Set also includes a micro servo that was specially modified with an extra wire, providing access to the...Servo Hitec HS-325HB - standard
A strong servo is a standard full carbon clincher wheelset, carbon modes increased strength.. Speed: 0.15 s/60 ° . Torque: 3.7 kg*cm. Dimensions: 40 x 20 x 37 mm....Servo Feetech FR0115M - standard
Standard servo. Power voltage range: 4.8 V to 7.4 V. Speed: 0.16 s/60°. Torque: 15.0 kg*cm Dimensions: 40.0 x 20.0 x 40.5 mm Weight: 59 gAluminium Servo Mount Feetech FK-MU-001
Aluminum mount to attach the modules to the robot's feet. Dimensions: 90 x 45 x 29 mm. Weight 48 gr.Standard Servo Mount - Pololu 3435
Plastic mount for standard servos, provides a convenient mount for servos on a flat surface. Mount in black.