Product description: 4-channel 4-20 mA to I2C analog signal converter - M5Stack M133
M5Stack M133 is a four-channel 4-20 mA analog signal to I2C signal converter . It is based on the STM32G030F6 system , which is responsible for communication via I2C with M5Stack and collects measurement data from the module's analog input connectors. It is also equipped with a power supply isolation system and an op-amp system for measuring data from analog current sensors. The converter will work well in industrial applications where current signals are used, including : in motor controllers or all industrial sensors . The module is compatible with popular programming platforms such as Arduino IDE and UIFlow , which facilitates integration with various systems.
The manufacturer has prepared detailed technical documentation for the product, which helps in starting work with the converter.
Characteristic features of the converter
- Converts an analog current signal in the range from 4 mA to 20 mA into a digital I2C signal
- It communicates with the M5Stack main module using the I2C protocol
- It is equipped with an STM32G030F6 chip, 64 KB Flash memory and 8 KB SRAM memory
- It has the ability to switch between internal and external power supply using a jumper
- It offers support for 2- and 4-wire sensors, with the ability to be easily switched using jumpers
- It has a built-in galvanic isolation system for system security
- It is compatible with programming platforms such as Arduino and UIFlow
Four available signal channels
This module offers four independent signal channels , which allows simultaneous monitoring of multiple power sources or different points in one system. This multi-channel functionality is important in applications where it is necessary to track several current parameters simultaneously.
Check out other M5Stack products in our offer!
Set contents
- 1x 4-channel 4-20 mA to I2C analog signal converter - M5Stack M133
- 5x 2.54mm 2-pin terminal connector
- 12x jumper
Technical specifications of the device
- Microcontroller: STM32G030F6
- Processor: 32-bit Cortex-M0+
- Power supply: 9V to 24V
- Number of channels: 4
- Communication: I2C
- Supported analog signal: current from 4 mA to 20 mA
- Sensor compatibility: 2 or 4-wire
- Galvanic isolation: HCNR200 system
- Operational amplifier: SGM321YC5/TR
- I2C address: 0x55
- Operating temperature range: 0°C to 40°C
- Programming: Arduino, UIFlow
- Dimensions: 54 x 54 x 13 mm
- Weight: 26.9 g
Useful links |