• EOL

Odroid Go Advance - set of elements for building GameBoy console

Index: ODR-16108

A set of elements to build a console that imitates the look of a portable GameBoy console. The platform is based on the Rockchip RK3326 processor with 1 GB RAM and a 3.5-inch LCD display. Powered by a 3.7V Li-Pol battery. Supports many popular emulators such as: Atari, NES, SNES, PSP, Sega CD, GameBoy and many more. Self-mounting kit.

Odroid Go Advance - set of elements for building GameBoy console
€85.50
€69.51 tax excl.
Product was replaced by other
Manufacturer: Odroid

Attention!

The product has been discontinued. Check others products incategory.

Product description: Odroid Go Advance - a set of elements for building a GameBoy console

A set of elements to build a console that imitates the look of a portable GameBoy console. The platform is based on the RockchipRK3326processorwith 1GB RAM and a 3.5-inch LCD display. Powered bya 3.7V Li-Pol battery. Supports manypopular emulators suchas: Atari, NES, SNES, PSP, Sega CD, GameBoy and many more. Self-mounting kit.

Odoid Go Advance kit contents

Zawartość zestawu

  1. USB cable type A
  2. Upper body
  3. Lower case
  4. Plastic buttons L / R and X, Y
  5. Plastic buttons D-Pad and A, B
  6. Odroid GO Advance motherboard
  7. Li-Pol 3000 mAh battery
  8. High-speed LCD screen
  9. Erasers for buttons I ~VI
  10. Eraser D-Pad
  11. Eraser for buttons A, B, X, Y
  12. Sticking tape for batteries
  13. Analogue joystick
  14. 3.5" TFT LCD screen 320 x 480 px
  15. Speaker 0.5 W
  16. Screws 1,7 x 5 - 7 pcs.
  17. Screws 1,7 x 8 - 4 pcs.
  18. Screwdriver

Installing software on Odroid Go Advance

The device usesa microSD card (not included in the package) to which the operating system prepared by the manufacturer must be uploaded.

The manufacturer provides animage of the system, which should be uploaded to the card via an appropriate program, e.g. Etcher.The manufacturer has also prepared ashort guide for uploading the system to the card.

Supported emulators

  • Atari2600
  • Atari5200
  • Atari7800
  • Atarilynx
  • Game Gear
  • GameBoy
  • GameBoy Advance
  • GameBoy Color
  • Sega Master System
  • Sega Mega Drive
  • Nintendo Entertainment System
  • PC Engine / TurboGrafx-16
  • PC Engine CD
  • PlayStation X
  • Sega CD
  • Super Nintendo Entertainment System

  • PlayStation Portable
  • anymore
  • Some games will not work at full speed

Details of the Odroid Go Advance insert

Szczegóły płytki

  1. The PMIC (RK817) acts as a charger and controls audio
  2. D-Pad buttons
  3. Buttons I to VI
  4. Buttons X, Y, A, B

Szczegóły płytki Odroid GO Advance

  1. CPU: RockChip RK3326 Quad-Core ARM Cortex-A35 1.3 GHz
    GPU: Mali-G31 Dvalin
  2. 1GB RAM DDR3L 786 MHz, 32 bit rail
  3. Flash memory 16 MB
  4. MicroSD memory card slot
  5. Button to switch off the tile - hold down for 6 s to switch off the tile
  6. UART port (not mounted by default)
  7. Speaker connector
  8. Battery connector
  9. USB Type A host
  10. Status LED (charging, operation, power)
  11. DC connector for power supply
  12. 10-pin expansion port
  13. Audio jack connector
  14. 20-pin LCD connector
  15. PWR switch
  16. Analogue joystick connector
  17. Left hand trigger
  18. Right-hand trigger

Odroid Go Advance console specifications

  • Processor:
    • CPU: RockChip RK3326 Quad-Core ARM Cortex-A35 1.3 GHz
    • GPU: Mali-G31 Dvalin
  • RAM: 1 GB DDR3L 786 MHz, 32 bit bus width
  • SPI flash memory: 16 MB - start-up
  • MicroSD memory card slot: UHS-1
  • Display: LCD TFT 3.5" 320 x 480 px (MIPI interface, ILI9488)
  • Audio: jack connector, speaker 0.5 W 8 Ω Mono
  • Power supply: Li-Pol 3.7 V / 3000 mAh battery, up to 10 hours of continuous play
  • DC jack connector: 2.5 mm, USB A cable can also be used for charging
  • External I/O: USB 2.0 host, 10-pin port (I2C, GPIO, IRQ 3.3 V)
  • Buttons: F1, F2, F3, F4, F5, F6, A, B, X, Y, D-Pad, left trigger, right trigger, analog joystick
  • Power consumption: from 250 mA to 500 mA while playing (depending on lighting and game), up to 1 mA in sleep mode

Diagram

Diagram blokowy

Installation instructions - video

UC - Microcontroller RK3399
UC - Core A35
UC - Flash 16 MB
UC - RAM 1 GB
UC - core 4. Quad Core
UC - freq 1.3 GHz
UC - USB 1x USB
UC - microSD yes
UC - I2C yes
UC - UART yes
UC - LCD interface yes
UC - Linux yes
Package width 22.5 cm
Package height 12.7 cm
Package depth 8.2 cm
Package weight 0.321 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: