Product description: Pimoroni Pico Plus 2 - board with RP2350B microcontroller - Pimoroni PIM724
A board working on the RP2350B microcontroller manufactured by Pimoroni. The RP2350B is a dual-core system based on the ARM Cortex M33 clocked at 150 MHz. Pimoroni Pico Plus 2 has 16 MB of QSPI Flash memory and 8 MB of PSRAM memory . The USB Type-C connector is used for power supply, programming and data transfer. Pimoroni Pico Plus 2 is also equipped with a STEMMA QT / Qwiic connector, so you can quickly connect I2C sensors with the same connector. The board also has connectors for debugging, SP / CE (for connecting SPI and serial devices) and has additionally built-in Reset and BOOT buttons. Pimoroni Pico Plus 2 is compatible with all Raspberry Pi Pico shields and add-ons.
Pimoroni Pico Plus 2 - board with RP2350B microcontroller - Pimoroni PIM724.
The Pimoroni Pico Plus 2 has the same layout and pinout as the original Raspberry Pi Pico 2.
Features of the Pimoroni Pico Plus 2 plate
- High performance: 150MHz dual-core ARM Cortex M33 offers improved performance over the previous model
- Security: ARM TrustZone support for Cortex-M, OTP enables advanced application security
- Original Pico design : The board has the same layout and pinout as the original Raspberry Pi Pico created by the Raspberry Pi Foundation, allowing you to use all the shields and other add-ons that are compatible with the Raspberry Pi Pico
- USB C connector: for programming, power and data transfer
Microcontroller RP2350
The Raspberry Pi RP2350 microcontroller is based on a dual-core Arm Cortex M33 operating at 150 MHz, which provides high performance while maintaining low power consumption. It comes in two versions - A (standard) and B with 48 usable GPIO pins . Compared to the RP2040, the RP2350 operates at a higher core clock speed and offers twice the SRAM memory. RP2350B supports ARM TrustZone for Cortex-M, OTP.
Pimoroni Pico Plus 2 Specifications
- System: RP2350B
- Processor: Dual Arm Cortex M33 clocked at up to 150 MHz with 520 KB SRAM
- PSRAM memory: 8MB
- QSPI Flash Memory: 16MB, supports XiP
- Connectors: USB Type-C, STEMMA QT / Qwiic, SP/CE, 3-pin JST-SH debugger
- Buttons: Reset, BOOT
- Diodes: 1x power diode, 1x charging diode
- Pins: 40 pin
- Built-in 3.3V voltage regulator (output current max. 600mA)
- Supply voltage: 3 V to 5.5 V
- Compatible with Raspberry Pi Pico extensions
- Dimensions: 53 x 21 x 9 mm
