Product description: W5500-EVB-PICO - board with RP2040 microcontroller and Ethernet - WIZnet
The WIZnet company board is equipped with a Raspberry Pi RP2040 microcontroller and an Ethernet TCP/IP W5500 system . W5500-EVB-PICO supports wired Internet protocols such as TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE and up to 8 independent hardware sockets . The RP2040 microcontroller has two ARM Cortex M0+ cores operating at a frequency of up to 133 MHz, 264 kB of RAM (no EEPROM) and an 8 MB SPI FLASH system for storing files and CircuitPython / MicroPython code.
W5500-EVB-PICO - board with RP2040 microcontroller and Ethernet - WIZnet.
The manufacturer has also prepared a detailed user's guide , which contains a description of individual pins - check it out!
Special features of the plate
- Equipped with a Raspberry Pi RP2040 microcontroller and an Ethernet W5500 system
- Has 30 multifunctional general purpose IOs (4 can be used as ADC)
- Includes built-in 12-bit 500 fs/s analog-to-digital converter (ADC)
- Offers a wide range of interfaces - 2x UART, 2x I2C, 2x SPI, 16x PWM channels
- Ability to emulate interfaces such as SD card and VGA
- Supports 8 independent hardware slots simultaneously
Technical specification of the RP2040 chip
- Dual-core ARM Cortex M0+ clocked at 133 MHz
- 264 kB onboard SRAM
- External Quad-SPI Flash with eXecute In Place (XIP)
- 30 programmable IOs
- 12-bit analog-to-digital converter (ADC) 500 fps
- Communication interfaces: 2x UART, 2x I2C, 2x SPI, 16x PWM channels
- SWD interface for debugging
- 1x timer with 4 alarms, 1x RTC real time counter
- Supported programming languages: C/C++ and MicroPython
Technical specification of the W5500 chip
- Supports wired internet protocols: TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
- Supports 8 independent hardware slots simultaneously
- Internal memory 32 kB for TX/RX buffers
- Supports high-speed serial peripheral interface (SPI MODE 0, 3)
- Built-in 10/100 Ethernet PHY
- Built-in RJ45 connector
- Built-in LDO regulator
Description of the module pins. For more information on the individual pins, see the user's guide .