Arduino Uno Ethernet Rev3
Arduino Uno Ethernet Rev3
Arduino Uno Ethernet Rev3
Arduino Uno Ethernet Rev3
Arduino Uno Ethernet Rev3 - zdjęcie 1
Arduino Uno Ethernet Rev3 - zdjęcie 2
Arduino Uno Ethernet Rev3 - zdjęcie 3
Arduino Uno Ethernet Rev3 - zdjęcie 4

Arduino Ethernet Rev3

Index: ARD-01063 EAN: 8058333490113

A popular module with AVR ATmega328 microcontroller in a replaceable housing. It has 32 kB of flash memory, 2 kB of RAM, 14 digital inputs/outputs of which 6 can be used as PWM channels, 6 analogue inputs and popular communication interfaces. It also has an Ethernet network controller and a slot for microSD memory cards.

€43.02
€34.98 tax excl.

Unavailable
Discontinued product
30-day returns
Manufacturer: Arduino

Attention!

The sale of the product has been completed. Check other devices in this category.

Product description: Arduino Ethernet Rev 3

The module allows for easy connection to the Ethernet network. This version of Arduino is also equipped with MircoSD memory card reader, which allows you to store more data. The board contains ATmega328 microcontroller , equipped with 14 digital inputs/outputs, of which 6 can be used as PWM outputs (e.g. to control motors) and 6 analog inputs. The board is clocked with a 16 MHz clock signal, has 32 kB of Flash memory and 2 kB of SRAM memory.

Arduino Uno Ethernet Rev3 - moduł, platforma, bootloader

Arduino Ethernet does not have a system controlling USB interface. For programming you need UART USB adapter or programmer (e.g. USBasp).

In our offer you will also find Arduino Leonardo Ethernet, which can be programmed directly via USB port.

Main features of Arduino Ethernet

Below we present some features that distinguish Arduino modules from other programmable tiles.

The nameDescription

Ethernet

Micro SD

This version has an Ethernet controller with RJ45 connector and a microSD memory card reader.

Arduino

Shield

The layout of connectors enables installation of dedicated Arduino Shield covers.

Extracts .

digital

14 digital inputs/outputs enable, among other things, to control LEDs, relays and read button statuses.

Performance

Current

The maximum current capacity of a single output is 40 mA.

Outputs

PWM

6 PWM outputs allow e.g. for motor control and diode brightness adjustment.

Inputs

analogue

6 inputs of the built-in 10-bit analogue-to-digital converter support, among others, sensors with analogue output.

Communication

serial

The device supports popular communication interfaces, among others: UART, I2C and SPI.
Special functions Some pins have special functions, a brief description of which is available in our guide .

Memory

Embedded

Atmega328 chip is clocked with 16 MHz signal, has 32 kB of flash memory, 1 kB EEPROM and 2 kB SRAM.

Power supply

DC connector

Any power supply from 7V to 12V with 5.5 x 2.1mm DC connector can be used to power Arduino.

Power supply

USB port

The board can be powered from a computer viaa USB cable with a maximum current capacity of 500 mA. Arduino has a system that protects the socket against short circuit and too high current flow.

Connector .

ICSP

The module has ICSP outputs to connect an external AVR programmer.

Pin

IOREF

The IOREF pin allows for direct access to the voltage with which the I/O outputs work.

Built-in

LED

The connected LED on pin 13 allows debugging of simple programs.

Output

3,3 V

The built-in voltage regulator enables external devices to be supplied with 3.3 V with current consumption of up to 50 mA.

Arduino Ethernet specification

  • Power supply voltage: 7 V to12 V
  • Microcontroller: ATmega328
    • Maximum clock frequency: 16 MHz
    • SRAM: 2 kB
    • Flash memory: 32 kB (5kB reserved for bootloader)
    • EEPROM memory: 1kB
  • Ports I/O: 14
  • PWM outputs: 6
  • Number of analog inputs: 6 (A/C converter channels)
  • Serial interfaces: UART, SPI, I2C
  • External interruptions
  • Connected LED
  • Built-in Ethernet controller W5100 TCP/IP
  • Card slotMicroSD

In our offer there is a PoE module for powering the system from the Ethernet network.

Aruino Ethernet programming

Creating and uploading software enables free environment provided by the manufacturer. Arduino Ethernet does not have a chip controlling USB interface. That's why UART<->USB adapter or AVR programmer is required for programming.

UC - Microcontroller ATmega328
UC - Core 8-bit AVR
UC - EEPROM 1 kB
UC - Flash 32 kB
UC - RAM 2 kB
UC - Digital pins 14
UC - analog in 6
UC - freq 16 MHz
UC - Ethernet yes
UC - A/C 10-bit
UC - PWM 6
UC - microSD yes

Same day shipping

Posting the payment for the order on our account on a business day up to 10 AM means sending the goods on the same day!

The time of payment depends on the ELIXIR's hours session of the sender's bank and the recipient of the transfer. It may take up to 2-4 working days.

Free delivery for orders exceeding 300 PLN!

Only for prepaid orders shipped to Poland.

Terms of delivery outside of Poland

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Slovakia

  • Delivery time: 2-4 days
  • Delivery cost: 35 PLN
  • Insurance: 5000 PLN
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: 50 PLN
  • Insurance: 5000 PLN
Kurier GLS - zone 3

Finland, Greece, Ireland, Sweden, Cyprus, Malta, Spain

  • Delivery time: 2-7 days
  • Delivery cost: 80 PLN
  • Insurance: 5000 PLN

Terms of delivery in Poland

Card image cap
Poczta Polska
  • Delivery time: 1-3 days
  • Payment in advance: od 9,90 PLN
  • Cash on delivery: 17,90 PLN
  • Insurance: 1000 PLN
Card image cap
Kurier GLS
  • Delivery time: 1-2 days
  • Payment in advance: od 14,90 PLN
  • Cash on delivery: 22,90 PLN
  • Insurance: 6000 PLN
Card image cap
Paczkomaty 24/7
  • Delivery time: 1-3 days
  • Payment in advance: od 12,90 PLN
  • Over 8000 parcel lockers
  • Insurance: 200 PLN
  • Free delivery of orders over 300 PLN does not apply to parcels addressed outside of Poland.
  • The delivery period is counted in working days from the date of dispatch of the order.

Be the first to ask a question about this product!

No customer reviews for the moment.

You might also like

TB6612FNG - two-channel motor controller 13.5V / 1A - Pololu 713

Polol module with a two-channel direct current motor controller. It is powered from 4.5 V to 13.5 V. Continuous current per channel is 1 A, with both channels connected the...
Index: PLL-00032
Index: PLL-00032
Available, 24h shipping!
(Check quantity)
Regular price €3.60 Price €3.60

Pololu MMA7341LC 3-Axis Analog Accelerometer with reg. 3/9g

3-axis Acceleration sensor operating in the 3G or 11G range. It has an integrated voltage regulator for power supply: 2.2 V - 16 V. The system communicates by means of an...
Index: PLL-00058
Index: PLL-00058
Unavailable
Regular price €9.07 Price €9.07

Micro Maestro USB 6-channel servo driver - Pololu 1350

6-channel servo controller with support for digital and analog signals. The user has at his or her disposal, the control of the servos through: the PC app (USB), serial...
Index: PLL-00067
Index: PLL-00067
In stock, shipping 24 hours!
(Check quantity)
Regular price €18.58 Price €18.58

Pololu LSM303DLM 3-axis digital Accelerometer + Magnetometer

The sensor is used to determine the acceleration and magnetic field. The measurement of these quantities is made possible by an integrated 3-axis accelerometer with a...
Index: PLL-00118
Index: PLL-00118
Unavailable
Regular price €6.74 Price €6.74

MinIMU-9 v2 - accelerometer, gyroscope and magnetometer IMU I2C - Polol module

Sensor for measuring acceleration, magnetic field and angular velocity. It is a combination of a 3-axis accelerometer, magnetometer and gyroscope. It communicates via the I2C...
Index: PLL-00852
Index: PLL-00852
Unavailable
Regular price €9.07 Price €9.07

EMTEC micro SD / SDHC 4GB class 4 memory card with adapter

Popular micro SD/SDHC format, used in smartphones, tablets, cameras. EMTEC product: Class 4, read speed up to 12 MB/sec, write speed up to 6 MB/sec.
Index: KAP-01096
Index: KAP-01096
Unavailable
Regular price €5.79 Price €5.79

MSX FT232RL - USB-UART FTDI 3.3 / 5V converter

The converter allows for communication between USB and UART interfaces. It allows to exchange data between PC and board with microcontroller. The module is based on...
Index: MOD-01611
Index: MOD-01611
Czas oczekiwania: ok. 10-30 dni
Regular price €8.35 Price €8.35

Customers who bought this product also bought:

Arduino Uno Rev3 - module A000066

The original module from the Arduino Uno with the AVR microcontroller ATmega328 in an interchangeable housing. It has 32 KB Flash memory, 2 KB RAM, 14 digital I/o of which 6...
Index: ARD-01060
Index: ARD-01060
In stock, shipping 24 hours!
(Check quantity)
Regular price €21.40 Price €21.40

Raspberry Pi Model B 512MB RAM

Raspberry Pi Model B (512MB RAM) is a miniature computer that can successfully replace a large office device. The module allows you to process video in high definition. Has:...
Index: RPI-00972
Index: RPI-00972

Case Raspberry Pi Model B RS - white

White opaque plastic housing for the miniature Raspberry Pi computer. It has slots for connectors and memory card and mounted anti-slip feet.
Index: RPI-01083
Index: RPI-01083
Unavailable
Regular price €0.21 Price €0.21

Emtec SD / SDHC 8GB Class 4 memory card

A popular SD/SDHC format, used in smartphones, tablets, cameras and more. A product from Emtec. Class 4, read speed up to 18 MB/sec, write speed up to 8 MB/sec.
Index: KAP-01202
Index: KAP-01202
Unavailable
Regular price €6.95 Price €6.95

Temperature sensor DS18B20 - digital 1-wire THT

Digital temperature sensor DS18B20 with 1-wire interface. Works in range from -55 °C to 125 °C. It is supplied with the voltage from 3.0 V to 5.5 V.
Index: SES-00165
Index: SES-00165
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.37 Price €1.37

Phototransistor TEFT4300 3mm 925nm

Phototransistor in the case of 3 mm. Maximum sensitivity for the wave with the length of 925 nm. The reading angle is 30 °. Darkened lens.
Index: UCC-00446
Index: UCC-00446
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.40 Price €0.40

Sharp GP2Y0A02YK0F - Analog distance sensor 20-150 cm - Pololu 1137

Analog distance sensor (rangefinder) Sharp GP2Y0A02YK0F to detect objects in the range from 20 to 150 cm.
Index: PLL-00073
Index: PLL-00073
In stock, shipping 24 hours!
(Check quantity)
Regular price €16.05 Price €16.05

Cable for analog Sharp distance sensors - Pololu 117

Cable with JST plug for analog distance sensors from Sharp company. Length: 30 cm
Index: PLL-00028
Index: PLL-00028
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.92 Price €0.92

Infrared receiver TSOP2236 - 36 kHz

IR receiver TSOP2236, it is operating at a frequency of 36 kHz  with a voltage from 4.5 V to 5.5 V.
Index: SES-00181
Index: SES-00181
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.58 Price €0.58

Microcontroller AVR - ATtiny13A-PU

Atmel Microcontroller AVR in 8-leg DIP case. Voltage supply range from 1.8 V to 5.5 V, with a clock signal frequency to 20 MHz, 1 KB Flash, 64 B RAM, 64 B EEPROM.
Index: UCC-00664
Index: UCC-00664
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.14 Price €1.14

Stand for DIP20 - 5pcs

Stand for chip DIP 20 pin. Price for 5 pieces.
Index: UCC-00096
Index: UCC-00096
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.35 Price €0.35

Stand for DIP28 narrow - 5pcs

Stand for chip DIP 28. Price for 5 pieces.  
Index: UCC-00090
Index: UCC-00090
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.28 Price €0.28

Products from the same category

DC Motor - Tamiya 980112M Mabuchi FA-130

Small metal motor reaching 12,300 rpm with a supply voltage of 3 V.
Index: PLL-00138
Index: PLL-00138
Unavailable
Regular price €1.98 Price €1.98

Micro-Match connector - 10 pin socket

Micro-Match connector for 10-pin printing.
Index: UCC-00283
Index: UCC-00283
Unavailable
Regular price €0.21 Price €0.21

Micro-Match connector for 10-pin tape

Micro-Match connector on 10-vein tape with a pitch of 1.27 mm.
Index: UCC-00285
Index: UCC-00285
Unavailable
Regular price €0.91 Price €0.91

Pololu LPY550AL 2-axis XZ gyroscope

A sensor for measuring angular speed in two axes: XZ. It has a choice of measuring range: to ±500 °/sec, ±2000 °/sec. It has an integrated voltage regulator and analogue...
Index: PLL-00493
Index: PLL-00493
Unavailable
Regular price €15.12 Price €15.12

3-axis magnetometer, digital MAG3110

3-axis magnetometer in a small case DFN. Measuring range: ±1000 uT. Sensitivity at 0.1 uT. The communication interface is I2C bus.
Index: SES-00964
Index: SES-00964
Unavailable
Regular price €1.86 Price €1.86

HiTechnic color sensor - for Lego Mindstorms EV3 and NXT

The sensor together with the sensor and the intensity is vision Lego NXT robot. The sensor is able to distinguish between all colors including the colors of the blocks.
Index: ROB-00982
Index: ROB-00982
Unavailable
Regular price €55.58 Price €55.58

Servomechanism - Lego Mindstorms NXT

The servo can serve as the actuator of the robot. The device allows precise movement accurate to 1 degree.
Index: ROB-00986
Index: ROB-00986
Unavailable
Regular price €32.33 Price €32.33

USB Bluetooth adapter - Lego Mindstorms NXT

Adapter USB-Bluetooth allows the wireless exchange of data between computers, PC or Mac and the NXT device.
Index: ROB-00987
Index: ROB-00987
Unavailable
Regular price €39.30 Price €39.30

Gift voucher - PLN 50

Gift certificate worth PLN 50.
Index: BON-01044
Index: BON-01044
Unavailable
Regular price €11.63 Price €11.63

Gift Card - 300zł

Gift certificate worth PLN 300.
Index: BON-01045
Index: BON-01045
Unavailable
Regular price €69.77 Price €69.77

Receiver module GPS-FGPMMOPA6H GPS

Receiver module based on MT3339 chip in the surface soldered case - SMD. It has a built-in antenna and the possibility to connect the external version.
Index: UCC-01233
Index: UCC-01233
Unavailable
Regular price €23.23 Price €23.23

Bluetooth antenna ANT9520-245

Internal Bluetooth antenna, ZigBee, WLAN in SMD housing. Works on the frequency: 2.45 GHz in 200 MHz, 1.5 dBi band. Dimensions of the housing are 9.5 x 2.0 x 1.0 mm .
Index: SES-01263
Index: SES-01263
Unavailable
Regular price €0.58 Price €0.58