Product description: Set of electronic components for Arduino - Iduino KTS021
A set of prototype components that can be used to create electronic circuits with Arduino or other microcontrollers. The set includes, among others: contact board, wire sets, LED matrix, segment displays, as well as a table to help identify resistors and much more. The whole thing is enclosed in a small container.
The set includes:
| L.p. | Picture | Description |
|---|---|---|
| 1 |  |
Contact plate 830 holes - 1 pc. Used for rapid prototyping circuits. |
| 2 |  |
Passive buzzer - 1 pc. Buzzer without a continuous tone generator. Allows you to add sound signalling to the project. |
| 3 |  |
Active buzzer - 1 szt. Buzzer with continuous tone generator. Enables adding sound signaling to the project. In active buzzer it is enough to give low state on its foot to make it emit sound. |
| 4 |  |
Precision potentiometer - 1 pc. Can be used as a knob in the user interface. |
| 5 |  |
Electrolytic capacitor 100 uF / 16V - 5 pcs. A passive electrical component with the ability to store electrical charge, used in power supply filtration and voltage regulators. It has a capacity of 100 uF / 50 V. |
| 6 |  |
RGB LED - 1 pc. LED diode emitting colours from the RGB colour palette. |
| 7 |  |
Tact switch 12x12mm - 4 pcs. - Monostable pushbutton mounted in a THT way with dimensions of 12 x 12 mm in yellow, red, blue and green colours. |
| 8 |  |
Rectifyingdiode 1N4007 - 1 pc. Rectifying diode, maximum operating voltage 1000 V, current up to 1 A. |
| 9 |  |
|
| 10 |  |
Goldpin strip 1x40 - 2 pcs. |
| 11 |  |
A passive electrical component with the ability to store electrical charge, used in power supply filtration and to create voltage regulators. |
| 12 |  |
LED - red - 10 pcs. LED diode emitting red light. |
| 13 |  |
LED - green - 10 pcs. Light emitting diode in green colour. |
| 14 |  |
LED - yellow - 10 pcs. Yellow LED light emitting diode. |
| 15 |  |
LED blue - 10 pcs. Blue emitting diode LED. |
| 16 |  |
220 Ωresistor - 10 pcs. A passive electrical component used to limit the current of an electrical circuit. |
| 17 | |
1 k Ωresistor Ω - 10 pcs. Passive electrical component, used to limit the current of an electrical circuit. |
| 18 | |
10 k Ωresistor Ω - 10 pcs. Passive electrical component, used to limit the current of an electrical circuit. |
| 19 |  |
Servo micro SG90 - 1 pc. Micro type servo with the jumpers. |
| 20 |  |
Temperature sensor LM35 - 1 pc. Analogue thermometer in which output voltage is proportional to measured temperature from -55 °C to 150 °C. |
| 21 |  |
Photoresistor - 2 pieces. A sensor that makes it possible to measure the intensity of incident light, for example, to detect whether a room is dark or bright. |
| 22 |  |
Shock sensor - 2 pieces. A sensor that detects vibrations and shocks. It disconnects the contacts when vibration is detected. |
| 23 |  |
InfraredLED - 1 pc. LED that emits an infrared beam. |
| 24 |  |
8-segment display - 1 pcs. The display enables displaying one digit with a dot and some letters. |
| 25 |  |
8-segment x4 display - 1 pcs. The display enables displaying four digits with a dot and some letters. |
| 26 |  |
LED matrix 8x8 - 1 pcs. Miniature LED Matrix composed of 64 LEDs arranged in the form of 8 rows and 8 columns. |
| 27 |  |
Sliding register 74HC595 - 1 pc. |
| 28 |  |
Small organizer - 1 pc. A small green container for storing small items. |
| 29 |  |
Stand for Arduino and pin board - 1 pc. Transparent stand for Arduino and PCB with mounting screws. |
| 30 |  |
Card with resistor colours - 1 pc. A card which makes it easier to distinguish resistors on the basis of colour stripes on their cases. |
| 31 |  |
Plastic container. |
Set of electronic components for Arduino - Iduino KTS021
Iduino KTS021 is a set of electronic prototyping elements, which allow to create projects in Arduino environment. The kit is tailored to the needs of people whose knowledge of programming is at a basic level.
Iduino KTS021 kit is equipped with many electronic elements, which are contained in one plastic container. This is a practical solution, making the kit easy to store and carry.
What does the IduinoKTS021 kit consist of?
Expanded Arduino kit includes contact board equipped with 830 holes. It is used for quick and easy prototyping. Next to it, the kit includes precise potentiometer, passive buzzer and active buzzer. Important elements of the kit are also 8-segment displays, servo type micro SG90 or ceramic capacitors.
The kit also includes color LEDs, resistors, sensors and 8 x 8 LED matrix. Iduino KTS021 includes tact-switch buttons, goldpin connector strip and many connection wires.
Useful links |
