- New
Fibaro Door/Window Sensor 2 - Z-Wave Plus - black - FGDW-002-3 ZW5
Index: FIB-23768
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
- On sale!
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
List of products by brand OpenPlatform
The headquarters of OpenPlatform is located in the Chinese city of Shenzhen. The company specializes, among others, in the production of open source hardware. Thanks to maintaining the highest standards, the company's products are distinguished not only by high quality and reliability, but also innovation. OpenPlatform devices are sold both in Asia, North and South America and Europe.
Loading...
Prototype Shield V3.0 + Breadboard for Arduino Mega
Shield for Arduino Mega, allowing you to create your own systems (shields). The model is suitable for the latest versions of the family Arduino Mega Rev3. It has led out all...
Index: MOD-08226
Index: MOD-08226
Color sensor, light transducer - frequency TCS3200D - module Iduino ME069
Module with color sensor enables a measurement of the RGB components, the output is the frequency which depends on the intensity of light of the selected color. It i s...
Index: MOD-01477
Index: MOD-01477
Hit sensor, the signal of which, after a collision with some object, goes into high status. It works with the voltage of 5 V. The board has 3-pin connector.
Index: OST-14278
Index: OST-14278
Module with 3W power LED - white
Module with a white power LED diode 3W. Temperature of white color ranges from 6000 to 6500 K. It shines at an angle of 180°. Voltage supply 5 V.
Index: OST-14260
Index: OST-14260
Module with LED RGB SMD diode - Iduino ST1090
Iduino module with diode SMD LEDS light emitting RGB colors. It has a 4-pin connector with adjustable input PWM. It can be controlled via the Arduino.
Index: OST-14284
Index: OST-14284
Relay module Iduino 4 channels - 10A/250VAC contacts - 5V coil
Module with four SRD-05 relays with a 5 V coil and optical insulation of the input as well as mounting holes. The system allows you to control the actuators by means of...
Index: OST-14480
Index: OST-14480
DataLogger Shield V1.0 RTC DS1307 with SD card reader - Shield for Arduino - Iduino ST1046
Shield for Arduino with RTC DS1307 and a slot for SD memory cards. It can be used as a data logger, it has a place for a round CR1220 battery and for additional module. It...
Index: MOD-08238
Index: MOD-08238
Module with LM35 temperature sensor
The module with analog temperature sensor LM35 . Powered with the voltage of the 5 V. It can read the temperature in the range from -55°C to 150°C with the accuracy of up to...
Index: OST-14288
Index: OST-14288
Temperature sensor DS18B20 - black module - Iduino SE042
Module with digital thermometer DS18B20+, equipped with 1-wire interface. The measuring range is from -55 °C to 125 °C, the supply voltage is 5 V.
Index: GRL-12512
Index: GRL-12512
Module with Hall sensor - Iduino SE014
The module with the Hall sensor, the detection range of the magnetic field is regulated with the potentiometer. It has a built-in digital and analog connector. Powered with the...
Index: OST-14293
Index: OST-14293
Infrared receiver module 1838 - 38kHz - Iduino ST1089
Module with IR receiver, operating at a frequency of 38 kHz. The module is powered with the voltage from 2.7 V to 5.5 V. It detects an angle of up to 90 °. Maximum detection...
Index: GRL-12508
Index: GRL-12508
Proto Prototype Shield + mini Breadboard - Shield for Arduino
Shield for Arduino Uno Rev3 and derivatives allow you to create your own shields. It has led out all the connectors and two LEDs, and a button at the user's disposal. In...
Index: MOD-08225
Index: MOD-08225
Matrix LED 8x8 + driver MAX7219 - small 32x32mm with wires
Matrix module consisting of 64 LEDs arranged in an 8 x 8 square. The set consists of the board with built-in controller and martix as well as female-female wires.
Index: MOD-07798
Index: MOD-07798
ACS712 current sensor module. It allows you to measure current from 0 A to 20 A both AC and DC, based on the Hall effect. The sensitivity of the system is 100 mV/A. Powered by...
Index: OST-14275
Index: OST-14275
Photoresistor analog - Iduino SE012
Module with photoresistor for Arduino. It is controlled via an analog signal, powered with the voltage from 3.3 V to 5 V.
Index: DNG-11885
Index: DNG-11885
Active buzzer module with generator - black - Iduino ST1143
Module with buzzer with a generator, allows you to generate audio signals with a constant signal voltage. Board in black.
Index: MOD-02962
Index: MOD-02962
Stepper Motor with 28BYJ-48 Gear 5V/0,1A/0,03Nm with ULN2003A driver
Five-wire stepper motor with driver on Darlington. It has an integrated 64:1 gearbox. It is powered by 5 V and draws 100 mA per coil. The holding torque on the gearbox is 0.3...
Index: MOT-03480
Index: MOT-03480
Relay module 8-channel optoisolation - 10A/250VAC contacts - 5V coil - red
The module has eight relay SRD-05 with a coil powered with voltage of 5 V along with optoelectronic insulation. The system allows you to control actuators with microcontroller...
Index: MOD-02357
Index: MOD-02357
IRF520 MOSFET Driver Module - Iduino ST1168
The executive module with the MOSFET transistor with the N channel to control the devices with higher current consumption than allowed by the control system, for example, a...
Index: MOD-08236
Index: MOD-08236
Li-Pol charger TP4056 1S 3,7V miniUSB
Simple charger for 1-purpose lithium-polymer batteries with a nominal voltage of 3.7V. The system is powered via a miniUSB connector or by wires.
Index: MOD-06943
Index: MOD-06943
Module with Hall sensor, magnetic field
Module with Hall sensor, analog magnetic switch. It allows for the detection of the magnetic field. The module has no soldered passive elements. It works with voltage of 5 V.
Index: OST-14290
Index: OST-14290
Extension GPIO Raspberry 4B/3B+/3B/2B/B+ to the contact plate + tape + breadboard
This module allows to connect GPIO pins of Raspberry Pi 4B, 3B+, 3B, 2B and B+ versions to the PCB using 40 wires tape. The kit includes GPIO extension module, contact board...
Index: OST-14314
Index: OST-14314
Step-Up Voltage Regulator LM2577 - 5-56V 3A
Step-Up voltage converter based on LM2577 chip with input voltage from 3,5 V to 35 V DC. Output voltage adjustable by potentiometer from 5 V to 56 V. Current capacity is max. 3...
Index: OST-14270
Index: OST-14270
Module Bluetooth v2.0 + EDR, class 2. It works with a voltage of 3.3 V and communicates over a serial UART interface (RX, TX), supports the AT command. Maximum transmitter...
Index: MOD-02570
Index: MOD-02570
Modules
One of the most popular OpenPlatform products is Iduino board, equipped with USB port. Devices of this type, depending on the version, have a dozen or several dozen digital inputs and outputs. Iduino can be used e.g. to control a motor, and thanks to compatibility with Arduino you can use free environment enabling simple and intuitive creation and installation of necessary software.
Practical sensors
In Botland's assortment you will also find various sensors made by OpenPlatform, which extend capabilities of Arduino minicomputer. We offer among others extremely precise sensors measuring both direct and alternating current, which can be connected to digital or analog input. You will also find devices that can measure sound in a very wide range. Sensors of this type are equipped with a sensitive microphone that detects even quiet sounds. What is more, we also offer modules equipped with Hall sensor, which detects magnetic field with the possibility of full adjustment using a potentiometer. Our offer also includes models intended for precise displacement measurement in three planes.
Other products
OpenPatform also offers MP3 players, characterized by high quality of processed sound, a fully adjustable transducer, as well as a high-end headphone transducer. The company specializes in manufacturing displays characterized by high resolution and thus high quality of the displayed image. We offer, among others, touch screens, fully compatible with a Raspberry Pi minicomputer. In our store there are available models with different diagonal, so choosing a specific one is not a problem.