List of products by brand Akso - Strona 3
Semiconductor relay SSR-80A 480VAC / 80A - 32VDC
Solid state relay, single-phase SSR with the AC voltage of 480 V and constant of 32 V. Rated current is 80 A. The device does not create noise when switching.NTC 110 10kΩ thermistor with M6 screw connection
Thermistor of NTC type with a resistance of 10 kΩ with connector for M6 screw. The connecting cable has a length of 160 mm.LED indicator 12V DC - 12mm - blue
LED light, working voltage 12 V DC. It has a diameter of 12 mm.Diode Schottky LL48 SMD 0,35A / 40V - 10pcs
Schottky diodes with a maximum current of 350 mA, reverse 40 V.Rotary switch 3-position 4 circuits - 60mm
Rotary switch, 3-state for the case, equipped with 16 contacts. The total height is 60 mm.Barrier strip for PCBs, 4-pin, 8.5mm raster - 5pcs.
Barrier strip for PCB, 4-pin with 8,5 mm pitch, maximum voltage for contacts is 300 V and current is 20 A.Stepper Motor 42HM48-0406 400 steps 12V / 0,4A / 0,31Nm
Unipolar stepper motor, six wire. It has a resolution of 400 steps per revolution (0.9 degrees) . It is powered by 12 V and draws 400 mA current per coil. The torque is 3.17...Plastic foot NS40 40x10mm - 4pcs
Round feet made of plastic used as a stand for various types of objects. The diameter of the leg is 40 mm and its height is 10 mm. It has a foam padding so it does not scratch...THT RWA Resistor 10W 0,33 Ohm - 10pcs
A precise resistor with high stability of the RWA type with a capacity of 10 W and a resistance of 0.33 Ω. The price includes 10 pieces.Limit switch with folding roller - WK828
Limit switch with lever ended with roller. Maximum operating parameters: voltage of 250 V and current of 16 A.LED indicator 230V AC - 28mm - red with a buzzer
LED light, operating voltage 230 V AC. It has a diameter of 28 mm.Ribbon cable 40 gray IDC raster 1.27 mm - roll 30.5 m
IDC ribbon cable, 40-vein. Pitch: 1,27 mm. Roller: 30.5 m.SMA female connector for printing, right angle reverse - 50Ω
The SMA female reverse angled connector with an impedance of 50 Ω, it is installed in the PCB. It is used to connect antennas and receivers.EMI aluminum tape with 20mm x 40m adhesive
Aluminium tape with adhesive used for shielding electronic device housings. It isolates the magnetic field and the interference associated with it - EMI. It can also be used as...Barrier strip for PCBs, 3-pin, 8.5mm raster
Barrier strap for PCB, 3-pin, with a pitch of 8.5 mm, the maximum voltage for the contacts is 300 V and current is 20 A.Adapter PCB - QFP32/SOP32 to DIP32
Adapter for connecting circuits in QFP/SOP cases to DIP outputs. It also allows you to connect circuits in a breadboard or connect with wires.Plug WT-16 - with earthing - white
The angled plug for mounting on the cable. It has the ground.Diode Schottky MBR10100 10A / 100V
Schottky diode with a maximum current of 10 A and a reverse voltage of 60 V.ON-OFF bistable switch - PBW-16APP - 2A 250V - flat red
Bistable pushbutton, flat with red lighting. Load capacity of contacts up to 2 A for 250 V .Radio module transmitter FS1000A + receiver 433 MHz
The set includes a transmitter and receiver that communicate with each other at a frequency of 433 MHz. The devices are powered with the 5 V voltage, communication with the...Socket 1x3pin - 2,54mm - long - 10pcs.
3-pin connector, easy to solder onto the PCB. It is used, for example, for connecting the male wires. Pitch is equal to 2.54 mm. It features long pins with a length of 10.5 mm.Ribbon cable 20 gray IDC, raster 1.27mm - roll 30.5m
IDC 20 core ribbon cable. Raster: 1.27 mm. Roll: 30,5 m .