Product description: Filament Spectrum PET-G MATT 1.75mm 1kg Desert Storm
Beige PET-G filament by Spectrum in the form of a fiber, wound on spools. The diameter of the material is 1.75 mm , the net weight is 1 kg . The product is hermetically packed with a desiccant. The mounting hole diameter is 52 mm. The product requires a heated bed to properly form prints. Due to its chemical composition, the filament allows for matte printing surfaces. The material can be used for: interior design and decoration, creating architectural models and educational projects, and prototyping industrial designs to visualize the concept.
In our offer of filaments you will also find other materials and colors.
Features of the PET-G MATT filament
- Hardly visible layers of the print
- UV stabilizer
- VICAT softening point - 75 ° C
- High-quality matt side surface
- Increased adhesion between the layers and the build plate
- No shrinkage when cooled down
- High component rigidity
Suggested filament printing parameters
| Printing temperature | From 230 ° C to 255 ° C |
| Table temperature | From 60 ° C to 80 ° C |
| Print speed | From 30 mm / s to 70 mm / s |
| Due to the differences in the design of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally. |
Technical specification and physical properties of the filament
| Parameter | Range |
|---|---|
| Filament diameter | 1.75 mm |
| Filament dimensional tolerance | +/- 0.05 mm |
| Color | Beige |
| Printing temperature | From 230 ° C to 255 ° C |
| Table temperature | From 60 ° C to 80 ° C |
| Material density | 1.35 g / cm 3 |
| Material | PET-G MATT |
| Spool outer diameter | 200 mm |
| Spool width | 67 mm |
| Mounting hole diameter | 52 mm |
| Package | Cardboard with print |
| Desiccant | Yes |
| Vacuum packing | Yes |
| Spool dimensions | 200 x 52 x 67 mm |
| Net weight | 1 kg |
