- Reduced price
Product description: Filament Rosa3D Flex 88A 1.75 mm 0.5 kg - Glow in the dark - Green
The Rosa3D filament , which glows green in the dark when exposed to light, is wound on a spool and has a mass of 0.5 kg and a diameter of 1.75 mm . The material is characterized by exceptional chemical resistance. Flex 88A has a high adhesion between layers , which guarantees very good print quality. In addition, it is resistant to stretching, and when subjected to compression and crushing, it retains its original shape. The product is fully compatible with printers that are not equipped with locks that prevent the use of cartridges from third-party suppliers.
Filament Rosa3D Flex 88A 1.75 mm 0.5 kg - Glow in the dark.
Filament by Rosa3D in a color that glows in the dark.
Properties of the Flex 88A filament
- Resistant to chemical agents and mechanical damage
- It has high interlayer adhesion - allows you to obtain high quality prints
- Resistant to repeated compression and stretching - returns to its original shape
Using the Flex 88A filament
- Gaskets, bumpers, dampers/anti-gravity feet
- Cases for smartphones and device construction
- Drone components
- Elements for RC cars
The Rosa3D Flex 88A filament is resistant to chemical agents and mechanical damage
Suggested filament printing parameters
| printing temperature | from 215°C to 250°C |
| table temperature | from 30°C to 60°C |
| Print cooling | recommended |
Due to the differences in the construction of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally.
Technical specification and physical properties of the filament Filament Rosa3D-Flex 88A 1.75 mm 0.5 kg
| PARAMETER | RANGE |
|---|---|
| Filament diameter | 1.75mm |
| Color | green, fluorescent |
| Material | Flex 88A |
| head temperature | from 215°C to 250°C |
| table temperature | from 30°C to 60°C |
| net weight | 0.5 kg |
