- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: COTER-EC Ethernet-CAN converter for NACS system
Converter of signalstransmitted overEthernet network toCAN 2.0B serial interface signals. CTER-EC enables simultaneous communication with up to 112 devices connected to the same bus. The maximum data transfer speed is 1 Mb/s. The converter offers the possibility of extendingCAN 2.0BframetoNX-CAN protocol frames, which ensures compatibility with other Netronix access control devices included in the NACS system.
Ethernet-CAN COTER-EC converter for NACS system.
Function implemented in the device
- Web server, enabling configuration, remote reset and viewing of the current state of the converter
- DHCP client
- Support for the NBNS protocol
- Find devices in a network with dynamic network setting assignment
- TCP conversion server - CAN 2.0B
- TFTP server for remote software reloading
- ACL access control list for web server and conversion server to restrict access to selected IP addresses
Description of exits
The converter has a4-pin screw connector. The manufacturer recommends that both ends of the CAN bus should be equipped with terminating resistors, taking into account the size of the network. For a short line, their value should be 120 Ω.
Diagram of the converter outputs - front view of the screw connectors.
| Pin | Description |
|---|---|
| 1 | Supply voltage (V). |
| 2 | System Mask (GND). |
| 3 | Low potential CAN bus line (CAN_L). |
| 4 | High potential CAN bus line (CAN_H). |
COTER-EC converter specifications
- Supply voltage: 8 V to 25 V
- Intensity: from 110 mA to 300 mA
- Communication interfaces:
- 100 Mb/s Ethernet interface
- CAN 2.0B serial interface configurable up to 1 Mb/s
- LEDs that inform about device operation and activity on the serial interface
- Built-in reset button to factory settings
Useful links |
