List of products by brand Netronix
MW-UDG wall RFID reader - 125kHz - gray
Netronix MD-UDG is a wall-mounted RFID reader that allows for contactless reading of data from Unique transponders. Such transponders are equipped with permanent, unique,...- On sale!
- Promotion
SNMP AGEDI-B agent in a DIN casing
Product designed to monitor indications from other devices, using MODBUS RTU. AGEDI-B enables cyclic temperature reading from two sensors from DS1920 family, connected to...- EOL
- EOL
UW-MDN wall RFID reader - 13,56MHz
Wall-mounted RFID transponder and proximity card reader. Works on 13.56 MHz frequency. UW-MDN is compatible with MIFARE standard (ISO14443-3) . It uses 1-Wire interface...- EOL
UW-D4G wall RFID reader - 125kHz
Wall mounted RFID reader , supports HID ISOProx II , HITAG 1, HITAG 2, H ITAG S , Q5 , Unique (EM4102) standards. The device operates at frequency of 125 kHz . For...- EOL
PAC-PUG RFID desk reader - 13,56MHz - beige
The device acts as a USB reader and programmer for RFID transponders and proximity cards. PAC-PUG is compatible with MIFARE Classic, DESFire, DESFire EV1, Plus, Ultralight,...- EOL
Ethernet-RS485 COTER-E4I converter
Converter of signals transmitted via Ethernet to RS485 serial interface signal . Modification of COTER-E4I settings is done via TCP/IP network connection and management...- EOL
- EOL
NKP-2 gate controller for the NACS system
Passage controller adapted for cooperation with NACS (Netronix Access Control System). This solution is used, among others, to verify people entering the building or room....- EOL
- EOL
- EOL
Ethernet-CAN COTER-EC converter for the NACS system
Converter of signals transmitted over Ethernet network to CAN 2.0B serial interface signals. It enables simultaneous communication with up to 112 devices connected to the...- EOL
UW-DNG wall RFID reader - 125kHz for NACS system
Wall-mounted RFID card and transponder reader . Compatible with Unique, HITAG, Q5 and HID standards. It operates at a frequency of 125 kHz . UW-DNG uses CAN 2.0B...- EOL
UW-DAL wall RFID reader - 125kHz
Card and RFID transponder reader , wall mountable. It operates at 125 kHz and is designed for contactless reading of data, compliant with Unique standard (EM4102 )....- EOL
L-113 antenna for RFID applications - 125kHz
Antenna used in low frequency RFID installations operating on 125 kHz . The antenna's inductance is 1 mH with +/- 5% tolerance. Winding resistance is 11 Ω ( tolerance +/- 10%).- EOL
RFID module NANO-MS - 13,56MHz
RFID proximity card reader , operating at 13.56 MHz . The miniature device is compatible with transponders operating in MIFARE standard. NANO-MS uses RS232 (TTL) interface...- EOL
L-112 antenna for RFID applications - 125kHz
Antenna used in creating RFID access control installations. Works on 125 kHz . Resistance of the antenna winding is 14 Ω with +/- 10% tolerance. Inductance is 1 mH (+/- 5%).- EOL
REDWU supply voltage reducer 16V - 25V to 12V
Voltage reducer used in RFID installations. Enables reduction of DC voltage from 14V to 25V to 12V.- EOL
UW-R4G wall RFID reader - 13,56MHz
A wall-mounted RFID transponder and proximity card reader . Works on 13.56 MHz frequency. Supports MIFARE standards: Classis, Plus, Ultralight C, DESFire iCLASS (CSN...- EOL
PAC-PUB RFID desk reader - 13,56MHz - black
Desk reader and USB programmer for RFID transponders and proximity cards. The device supports MIFARE Classic, DESFire, DESFire EV1, Plus, Ultralight, Ultralight C standards....- EOL
RFID module CTU-R5RM - 13,56MHz
Proximity transponder and RFID card reader , operating at 13.56 MHz. It is compatible with MIFARE, MIFARE Plus, ICODE SLI and iCLASS standards. CTU-R5RM supports the...- EOL
MW-R7G wall RFID reader - 13,56MHz - grey
Wall-mounted RFID card and proximity transponder reader operating at 13.56 MHz . Compatible with MIFARE Classis, MIFARE Plus, MIFARE Ultralight C, MIFARE DESFire, ICODE...- EOL
MW-D7B wall RFID reader - 125kHz - black
Wall mounted RFID card and transponder reader compatible with Unique, HITAG, Q5 and HID standards . The device uses 125 kHz frequency for operation. It supports four...- EOL
MW-D7G wall RFID reader - 125KHZ - grey
Wall-mounted RFID card and transponder reader . The device operates on 125 kHz frequency. It is compatible with Unique, HITAG, Q5 and HID standards. MW-D7 supports...- EOL
Netronix - valued manufacturer of RFID solutions
Netronix is a Polish company with headquarters in Warsaw, Poland. The most important part of the company activity is designing, manufacturing and implementing various products and technological solutions using RFID systems. The technology is widely used, among others, in access control systems, in industry, trade, in the management of logistic and warehouse processes, for marking and inventory of equipment, for identity verification and in many other applications. Netronix is also a creator of authorial access control system NACS.
Netronix brand offer
In Netronix offer there is a wide selection of products and solutions using RFID technology. The company offers, among others, build-in modules, RFID readers (for access control systems, work time monitoring, protecting original products against counterfeiting, shipment tracking, etc.) or active RFID devices (extended range). The company is also the author of electronic devices and systems made on individual orders of customers, for example in industry, science or logistics. The company also develops software for RFID systems, access control systems and other solutions using radio frequency identification.
What Netronix products can you find in Botland?
In our store you will find many proposals from Netronix. We offer antennas for RFID systems, desktop and wall mounted readers, converters, RFID modules, voltage reducers and many more. You can use these products for example to create your own access control system within intelligent building installation. The basic RFID reader connected to a computer is a perfect solution for people, who have an eID and want to do official business with it.