- EOL
Attention! The product has been discontinued. Check other products in category. |
Description
Universal platform for micro:bit with two wheels and ball support. It has two micro DC motors with the motor control unit, LED RGB and a set of sensors for line tracking, obstacle avoidance, distance measurement, etc. Thanks to the integrated Bluetooth module and Wi-Fi 2.4G the robot can be controlled remotely. The controller is not included, it can be purchased separately in our store.
The platform is very easy to install, to run the robot just screw both platforms together and add the Raspberry Pi. On the platform there are the motor drivers TB6612FNG, two N20 motors, two reflective IR sensors: ST188 and ITR20001/T, potentiometer, two wheels 42 mm and others. It also has a lot of connectors that facilitate the connection of additional modules.
Contents of the AlphaBot2-Base platform
- Control interface AlphaBot2: for connecting various sensors
- Ultrasonic interface module
- Indicators of avoiding obstacles
- Two ball supports type Omni
- ST188: relfective IR sensor for obstacle avoidance
- ITR20001/T: relfective IR sensor for line detecting
- Potentiometer to set the range of avoiding obstacles
- TB6612FNG: 2-channel H bridge - motors driver
- LM393: voltage comparator
- 2 motors micro N20: reducer 1:30, 6 V, 600 rpm
- 2 rubber wheels: diameter 42 mm, width 19 mm
- The power switch
- Battery container: supports battery type 14500
- WS2812B diode: RGB LCD
- LED power indicator
Contents of the AlphaBot2 platform formicro:bit
- Connector micro:bit: to connect the micro:bit module
- Control interface AlphaBot2: AlphaBot2-Base
- RT9193-33:voltage regulator 3.3 V, power for micro:bit
- PCA9685:PWM control system, the expansion I/O, I2C interface
- TLC1543: 10-bit converter A/C allows the module micro:bit on the use of sensor tracking lines
- Buzzer
- WMP1584:voltage regulator 5 V
The set
The set includes:
The kit does not contain batteries14500and modulemicro:bit. They must be purchased separately. |
Useful links |