- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description
KA3005P is a stabilized laboratory power supply with the programmable memory and smoothly adjustable voltage in the range from 0 to 30 V and current in range from 0 to 5 A. In addition to control from the front panel, it also has the posibility to control through software on a PC via the USB cable.
The main functions of the power supply:
- The device can operate in the following modes:
- C. V. - DC voltage of output
- C. C. - DC load
- The system is equipped with protection from surges and overloads
- The PSU has a 5 storages to save current, voltage and operation modes
- The device has a full adjustment of the current, not just its limitations
- Has the accuracy of indications of the current up to 3 decimal places
- Has two kinds of protection:
- OVP (overvoltage protection)
- OCP (overcurrent protection).
- Regulations:
- Smooth adjustment of voltage in a whole range
- Smooth current adjustment throughout the whole range
- Switching on and off the power supply - 4 buttons
- Recording and reading from the device memory.
- Control viasoftwarethrough the USB cable or RS232 port
- Function of locking buttons
Specification
- Voltage range: 0 - 30 V
- Current range: 0 - 5 A
- Parameters regulations
- Voltage: =< 0.01% +2 mV
- Current: =< 0.1% +1 0mA
- The accuracy of parameter settings:
- Voltage: 10 mV
- Current: 1 mA
- Precision of settings
- Voltages 0.5% +20 mV
- Currents 0.5% +10 mA
- Output voltage ripples
- Voltage: + 2 mVrms
- Current: + 3 mArms
- Reaction time of:
- Increasing voltage: =< 100 MS (rated load 10 %)
- Deacreasing voltage: =< 100 MS (rated load 10 %)
Includes:
- Laboratory power supply KA-Korad 3005P
- USB cable
- Power cable
- The user manual
- The software (also to download)
