- EOL
Attention! The product has been discontinued. Check others products incategory. |
Description
Sound card X400 provides the users of Raspberry Pi, version 3B, 2B and B+, the flexibility of sound functions comparable to the capabilities of cards used in computers. It has a built-in potentiometer to adjust the sound and the IR receiver.
Controller for Raspberry Pi 2 and B+ can be downloaded fromthe manufacturer's website. |
The device has two RCA jacks and jack slot of 3.5 mm audio line. On the board is a knob for volume control and IR receiver. Information about card X400 can be found onthe product's page. The manufacturer submits a detailed configuration of the module.
The distribution of the elements of the module X400 Expansion Shield
Specification
- Connection: using GPIO
- Supply voltage: 6 V to 24 V
- Built-in converter to power the Raspberry
- The module works with the Raspberry Pi, version of 3B, 2B and B+
- It has a converter with 24-bit resolution, with the speed of up to 192 kHz
- Two RCA jacks to connect the speakers
- Used interface I2S to reduce the CPU load
- The possibility to disable speakers, microphone and amplifier using the appropriate jumpers
- Built-in amplifier of high quality: TI TPA6133A
- Output power: 2 x 20 W 4 Ω
- DIP switches to control the GPIO pins
- Knob to adjust the volume
- IR receiver for wireless communication
- Output 3.5 mm jack to connect headphones
- Built-in amplifier of class D for external speakers
- High ratio of SNR ( Signal to Noise Ratio)- the ratio of signal to noise
- The module is suitable for GPIO connectors of Raspberry Pi 3B, 2B and B+
- The kit includes jumpers, screws and installation bushings
Useful links |