- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description: 3D printer resin FlashForge Standard LCD 0,5 kg - White
Standard LCD photopolymer resin in a solid white color. It is used as a molding material for prints in open source 3D print ers equipped with LCD projector. The product is characterized by a short exposure time. During use it may emit a slightly unpleasant smell. Finished models obtained from FlashForge Standard LCD are characterized by high detail and smooth surface. The resin is cured by 405 nm light waves. Package contains 0.5 kg of product. FlashForge LCD Standard resin is suitable for low volume production and prototype runs.
Resin for 3D printers FlashForge Standard LCD 0,5 kg - White.
3D printer resin - sample printout.
Resin for 3D printers
Resin is a light-curing material designed for 3D printing. 3D printers using DLP and LCD technology can be successfully used to create even very detailed models. It is worth remembering that resin for 3D printing emits a slight odor, so all rooms where there are printers of this type, must be very well ventilated.
When working with the resin, always use protective equipment: glasses and nitrile gloves.
Shake the resin before use.
Specification of resin for 3D printers
| Parameter | Value |
|---|---|
| Manufacturer | FlashForge |
| Resin type | LCD photopolymer |
| Colour | White |
| Density | 1.05 to 1.15 g/ml |
| Viscosity | 250 to 350 cps (at 25°C) |
| Shore Hardness | 85 D |
| Tensile strength | 48 MPa |
| Tensile elasticity | 2250 MPa |
| Elongation at tension | 10% |
| Bending strength | 86 MPa |
| Packing capacity | 500 g |
Useful links |
