- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description
Chassis AlphaBot is a 2-wheel platform for building a mobile robot. The kit includes a platform, two micro DC motors withwheelsand dedicated mounting. In addition, the kit includes a line sensor, speed measurementmodule, proximity IR sensor, remote control, moduleUno Plus, servo, ultrasonic distance sensor and bluetooth module. The platform is compatible with popular mini-controllers, for exampleArduinoor Raspberry Pi (you can connect them separately or they can also work together). Kit includes all AlphaBot Basicchassis parts + optional Accessory Shield and Bluetooth modules.
The platform is easy to install, to launch the robot simply install the motor, install the wheels and add any controller (e.g. Arduino Uno). On the platform there is a motor driver LM298P, voltage regulator LM2596 for a stable 5V voltage and the A/C TLC1543 converter, allowing the use of analog sensors with the Raspberry Pi. It also has a lot of connectors that facilitate the connection of additional modules.
|
The product is compatible with Arduino and Raspberry Pi The manufacturer offers auser guide, along with an exemplary program for Arduino and Raspberry. |
Uno Plus
Uno Plus is compatible with popular Arduino Uno module. This means that it can be programmed throughthe Arduino development environment IDEusing available libraries. Pads, the so-calledArduino Shield also cooperate with the Waveshare module.
The board contains an ATmega328 microcontroller. It is equipped with 14 digital inputs/outputs, 6 of which can be used as PWM outputs (e.g. for motor control), and 6 as analog inputs. The system works with the ticking signalwith the 16 MHzfrequency. The module also has a USB connector, DC power socket, RESET button, and outputs for connecting the AVR programmer.
Contents of the AlphaBot platform
- Raspberry Pi interface: for connecting to Raspberry
- Arduino interface: for connecting to Arduino
- Connector for motors
- Connector for ultrasonic distance sensor
- Connector for servo
- Connector for the module avoiding obstacles
- Connector for speed sensor
- Battery container 18650 (batteries not included - sold separately)
- Place to connect external power source
- Arduino connectors: to connect the pads for Arduino
- UART interface: for connecting the Bluetooth module
- SPI interface: for connecting the module NFR24L01
- Connector for line sensor
- TLC1543 Converter: 10-bit, enables the use of analog modules with the Raspberry Pi
- The bridge LM298P: for motor control up to 2 A
- LED protecting from the backset
- The power switch
- LM2596: voltage regulator 5 V
- LED power indicator
- Switch UART: the interaction between Arduino and Raspberry
- Receiver IR radiation: allows you to control the robot via the infrared port
- Choice between Arduino / Raspberry: selects which device controls the peripherals of the robot
|
Set requires self-assembly, the manufacturer provides the manualin a .pdf file. |
The set
The set includes:
| L. p. | Photo | Description |
|---|---|---|
| 1 |  |
Main board AlphaBot. |
| 2 |  |
Waveshare Uno Plus. |
| 3 |  |
Accessory Shield for Arduino. |
| 4 |  |
Line sensor (line follower). |
| 5 |  |
Slip sensor - 2. |
| 6 |  |
Proximity IR sensor - 2 PCs. |
| 7 |  |
Ultrasonic distance sensor. |
| 8 |  |
The Bluetooth Module. |
| 9 |  |
Motor with reducer - 2 PCs. |
| 10 |  |
Servo type micro. |
| 11 |  |
Wheel - 2 PCs. |
| 12 |  |
Acrylic chassis. |
| 13 |  |
Brackets for engine mounts - 4 PCs. |
| 14 |  |
Ball support. |
| 15 |  |
20-slots disk encoder. |
| 16 |  |
IR remote control. |
| 17 |  |
Connection cable 4-pin, 4 cm, raster 2.54 mm - 2 PCs. |
| 18 |
|
Connecting cable 3-pin, 4 cm, raster 2.54 mm - 2 PCs. |
| 19 |  |
The connecting cable 7-pin, 4 cm, 2.54 mm pitch |
| 20 |  |
Cable USB-microUSB. |
| 21 |  |
Screw and spacers. |
|
The kit does not contain batteries 18650. They must be purchased separately. |
Useful links |
