Description
The module is equipped with one KT-450 relaywith a coil suppied with voltage of 5 V. The system is controlled directly from the USB connector. In addition, the module provides 4 GPIO pins operating as analog inputs or digital inputs / digital. Works with voltage of 5 V.
Service module
All pins can be individually programmed as inputs or outputs. The module can be controlled from any application with a serial console, for example, RealTerm. The device supports user-friendly commands, e.g. "relay 1" turns on relay 1. The full list is given in the user guide. The manufacturer also provides source codes of programs in different programming languages.
Specification
- 1 relay
- Maximum contact voltage: 120 V AC / 1 A. 24 V DC / 2 A
- Screw terminal block connectors
- Control: UART interface
- The number of GPIOs: 4 (goldpins 2.54 mm)
- The number of analog outputs: 4 (can work also as digital)
- Voltage: 5V (miniUSB)
- The maximum performance of the outputs current: 25 mA
- Working voltage of pins: 5 V
- Resolution of the A/C transmitter: 10-bit
- Connector: miniUSB (wire soldseparately)
- Module dimensions: 68 x 26 mm
| The manufacturer has prepared a detailed guide together with the module's manual. |
Useful links |
